Keep brake fluid moving securely to the front left wheel with the Sunsong brake hose, part number 2205694. This Brake Hydraulic Hose is a direct-fit replacement for the front left position on the 2013-2016 Chrysler Town & Country, the 2013-2020 Dodge Grand Caravan, and the 2014 Ram C/V. See the Buyer's Guide tab for engine details. As the flexible link between the vehicle's rigid brake line and the brake assembly at the wheel, it carries hydraulic pressure while allowing for suspension and steering movement.
Sunsong is a vertically integrated manufacturer that researches, develops, and builds automotive fluid transfer hoses and lines. Its products are developed around what installers need, and OEMs trust them to deliver exact form, fit, and function.
Hoses with banjo end fittings come with new copper washers for proper sealing. A Sunsong brake hydraulic hose may be worth considering if the original shows cracking, swelling, or fluid seepage, or if the pedal feels soft. Diagnose the cause first, and bleed the brakes after installation according to the vehicle's service procedure.
Interchange: 150.67424 · 350-40317
BH622361 · BHA2205694 · BHA622361 · 4683997AC · 4683997AD · 4683997AI · 4683997AJ · 4683997AK · 4683997AL · 4683997AM · 4683997AMB · 4683997AN · H622361 · 778144 · BH382520 · 15067424 · 35040317
This part cross-references / interchanges with the following part numbers:
Which position and vehicles does this hose fit?
It is cataloged for the front left position on the 2013-2016 Chrysler Town & Country, 2013-2020 Dodge Grand Caravan, and 2014 Ram C/V. See the Buyer's Guide tab for engine details.
What are signs a brake hydraulic hose may need replacing?
Common signs include cracking, swelling or bulging, brake fluid seeping near the fittings, or a soft, spongy pedal. Other brake parts can cause similar symptoms, so diagnose the cause before replacing.
What standards does this brake hose meet?
Sunsong states its brake hoses meet or exceed DOT, Federal Vehicle Safety Standards (FMVSS 106), and SAE J1401 standards. Each hose is also pressure tested before leaving the factory.
Does it come with brackets or washers?
Brackets, grommets, molded plastic guards, wire clips, and protective sleeves are included as required. Hoses with banjo end fittings come with new copper washers for proper sealing.
Do the brakes need to be bled after installation?
Yes. Replacing a brake hose opens the hydraulic system, so bleed the brakes afterward according to the vehicle's service procedure.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.