Keep pressurized brake fluid flowing to the front right wheel with the Sunsong brake hose, part number 2205860. It is a direct-fit replacement for the 2015-2017 Ford Expedition and the 2015-2017 Lincoln Navigator, designed to deliver the form, fit, and function of the original hose at the front right position. See the "Vehicles it fits" section for engine-specific details.
A brake hydraulic hose is the flexible link between the vehicle's rigid brake line and the brake at the wheel. It carries fluid under pressure while allowing for suspension and steering movement. Sunsong is a vertically integrated manufacturer that researches, develops, and builds automotive fluid transfer hoses and lines.
Signs a brake hose may need replacing include visible cracks or bulges, fluid weeping at the hose or its fittings, and a soft, spongy brake pedal. Other brake components can cause these same symptoms, so inspect the system first. If the front right hose is at fault, this Sunsong brake hydraulic hose replaces it. Bleed the brakes after installation as directed by the vehicle service information.
Interchange: 1474-232882 · 150.65189 · 350-54415
BH622460 · BHA622460 · H622460 · 778243 · 7L1Z2078B · DL1Z2078A · 610034 · BH384413 · 1474232882 · 15065189 · 35054415
This part cross-references / interchanges with the following part numbers:
Which vehicles does the Sunsong 2205860 brake hose fit?
It is listed for the 2015-2017 Ford Expedition and the 2015-2017 Lincoln Navigator in the front right position. See the "Vehicles it fits" section for engine-specific details.
Does it come with brackets or washers?
Brackets, grommets, molded plastic guards, wire clips, and protective sleeves are included as the application requires. Hoses with banjo end fittings also come with new copper washers.
What standards does this brake hose meet?
Sunsong states its brake hoses meet or exceed DOT, FMVSS 106, and SAE J1401 standards. Each hose is also pressure tested before leaving the factory.
What are signs a brake hose may need replacing?
Signs include cracks, bulges, fluid seepage at the hose or its fittings, and a soft, spongy pedal. Other brake components can cause the same symptoms, so diagnose the system before replacing parts.
Do I need to bleed the brakes after installing the hose?
Yes. Opening the hydraulic system lets air in, so bleed the brakes after installation as directed by the vehicle service information.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
