Keep brake fluid moving where the chassis meets the wheel with the Sunsong brake hose, part number 2205973, cataloged for the front left position. This flexible hydraulic line carries pressurized brake fluid between the vehicle's rigid brake lines and the brake at the wheel, and it is a direct-fit application for the 2013-2017 Ford Fusion, the 2013-2020 Lincoln MKZ and the 2019-2020 Ford SSV Plug-In Hybrid. See the "Vehicles it fits" section for engine-level details.
Sunsong is a vertically integrated manufacturer that researches, develops and builds automotive fluid transfer hoses and lines. It designs its products around what the installer needs, with the aim of exact form, fit and function.
Signs a brake hose may need replacing include cracks, bulges or chafing on the hose, brake fluid seeping at the fittings, or a soft or spongy pedal. Other brake faults can cause similar symptoms, so diagnose the cause first. If the original line is at fault, this Sunsong brake hydraulic hose replaces it. Follow the vehicle service information for installation and bleeding.
Interchange: 1474-537848 · 150.61136 · 350-54098
BH622205 · BHA622205 · H622205 · 777988 · DG9Z2078B · DG9Z2078C · DG9Z2078E · BRHF130 · 683794 · BH383790 · BH144620 · BH382949 · 1474537848 · 15061136 · 35054098
This part cross-references / interchanges with the following part numbers:
Which vehicles does part 2205973 fit?
It is listed for the 2013-2017 Ford Fusion, 2013-2020 Lincoln MKZ and 2019-2020 Ford SSV Plug-In Hybrid in the front left position. See the "Vehicles it fits" section for engine details.
What standards does this brake hose meet?
Sunsong states its brake hoses meet or exceed DOT, FMVSS 106 and SAE J1401 standards. Each hose also goes through a high-pressure quality assurance test before leaving the factory.
Does it come with brackets or clips?
Brackets, grommets, molded plastic guards, wire clips and protective sleeves are included as the application requires. Hoses with banjo end fittings also include new copper washers.
What are signs a brake hose may need replacing?
Common signs are a cracked, bulging or chafed hose, fluid seeping at the fittings, or a soft or spongy brake pedal. Other brake faults can cause similar symptoms, so diagnose the cause before replacing.
Do I need to bleed the brakes after installing it?
Yes. Replacing a brake hose opens the hydraulic system, so bleed the brakes as directed by the vehicle service information and check for leaks before driving.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
