Sunsong Brake Hydraulic Hose P/N:2205964
Keep brake fluid moving to the front left wheel with the Sunsong brake hose 2206367. It is a direct-fit replacement for the front left position on the 2013-2018 Hyundai Santa Fe, 2013-2018 Hyundai Santa Fe Sport and 2013-2019 Hyundai Santa Fe XL. See the Buyer's Guide tab for engine details.
This flexible hydraulic line carries pressurized brake fluid from the vehicle's rigid brake lines to the brake at the wheel, and it flexes as the suspension and steering move. Sunsong is a vertically integrated maker of automotive fluid transfer hoses and lines, and it precision engineers each brake hose to exact fit.
Signs a brake hose may need replacing include a soft or spongy pedal, visible cracking, bulging or chafing, and brake fluid seeping at the hose or its fittings. Have the brake system inspected to confirm the cause, and bleed the brakes after installation as directed by the vehicle service information.
Interchange: 1474-537893 · 150.51106 · 350-03071
1474537893 · 15051106 · 35003071 · BH622370 · BHA622370 · H622370 · 778153 · 587312W000 · 587312P100 · BH383836 · BH144687
This part cross-references / interchanges with the following part numbers:
Which vehicles does this brake hose fit?
It fits the front left position on the 2013-2018 Hyundai Santa Fe, 2013-2018 Hyundai Santa Fe Sport and 2013-2019 Hyundai Santa Fe XL. See the Buyer's Guide tab for engine details.
Does the Sunsong brake hydraulic hose meet safety standards?
Yes. Sunsong states its brake hoses meet or exceed DOT, FMVSS 106 and SAE J1401 standards. Each hose is also high-pressure tested before it leaves the factory.
Is mounting hardware included?
Brackets, grommets, molded plastic guards, wire clips and protective sleeves are included where the application requires them. Hoses with banjo end fittings come with new copper washers.
What are signs a brake hose may need replacing?
Common signs include a soft or spongy brake pedal, a cracked, bulging or chafed hose, and fluid seeping at the fittings. Have the brake system inspected to confirm the cause before replacing parts.
Do I need to bleed the brakes after installing it?
Yes. Replacing a brake hose opens the hydraulic system, so the brakes should be bled to remove air. Follow the vehicle's service information for the procedure.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.