Carry brake fluid pressure to the wheel with the Sunsong brake hose, part number 2207160, cataloged for the front right position. It is a direct-fit application for all engines of the 2010-2014 Subaru Outback, with one hose used per application. The hose is the flexible link that carries hydraulic brake pressure from the rigid brake lines to the brake at the wheel, and it flexes with suspension and steering movement.
Sunsong is a vertically integrated manufacturer that researches, develops and builds automotive fluid transfer hoses and lines. It designs its products around what installers need.
- Standards: Meets or exceeds DOT, FMVSS 106 and SAE J1401 standards, and the hose is DOT approved.
- Pressure tested: Each hose goes through a high-pressure quality assurance test before it leaves the factory.
- Hose and fittings: EPDM hose with a 7/16 in female fitting on one end and a 10 mm male fitting on the other. Overall length is 276 mm (10.86 in).
- Precision engineered: Engineered to exact fit for the listed application. A bracket is not included.
Signs a brake hose may need replacing include cracks or bulges in the hose, brake fluid seeping at a fitting, or a soft, spongy pedal. These symptoms can have other causes, so diagnose the brake system first. If the front right hose is the problem, this Sunsong brake hydraulic hose replaces it. Country of origin: Thailand.
Interchange: 1474-335279 · 150.47042
1474335279 · 15047042 · BH621562 · BHA621562 · H621562 · 777347 · 26540AJ061 · 26540AJ06A · 26590AJ060
This part cross-references / interchanges with the following part numbers:
2207160, 1474-335279, BH621562, BHA621562, 150.47042, H621562, 777347, 26540AJ061, 26540AJ06A, 26590AJ060
Frequently Asked Questions
Which vehicle does part 2207160 fit?
It is listed for all engines of the 2010-2014 Subaru Outback in the front right position, with one hose per application.
What position does this brake hose install in?
This hose is cataloged for the front right position. If you are also replacing the other side, use a hose cataloged for that side.
What standards does this hose meet?
Sunsong states it meets or exceeds DOT, FMVSS 106 and SAE J1401 standards. The hose is also DOT approved.
Is a mounting bracket included?
No, a bracket is not included. Check the vehicle service information for the correct mounting hardware and whether the original parts may be reused.
What are the fitting sizes and overall length?
One end has a 7/16 in female fitting and the other has a 10 mm male fitting. Overall length is 276 mm (10.86 in).
