Keep hydraulic power steering fluid moving from the pump to the steering gear with the Sunsong Power Steering Pressure Line Hose Assembly 3401289. It installs as a direct-fit replacement for the 1993-1995 Chevrolet Camaro [All] and 1993-1995 Pontiac Firebird [All], routing the high-pressure fluid that makes light, assisted steering possible.
- High-pressure rated: the pressure hose is built to exceed original-equipment performance standards, with a 1,500 psi max working pressure, an 8,700 psi burst rating, and 1,600 lb tensile strength.
- CSM hose: constructed with CSM hose material for durable fluid transfer.
- Male O-Ring ends: Male O-Ring fittings on both ends, with 16 mm and 18 mm fitting inside diameters; overall length 27.1 in (688 mm).
- Factory tested: each pressure hose is subjected to a high-pressure quality-assurance test before it leaves the factory.
The pressure line carries pressurized power steering fluid from the pump to the steering gear. Signs this hose may need replacing include power steering fluid leaks, a whine while turning, or heavy, hard steering — if a failed pressure line is the cause, this assembly replaces it. Mounting brackets, mounts, inserts, retainer clips, sleeves, washers, bushings, and a switch port are not included; transfer or replace any hardware as directed by the vehicle service procedure. Country of origin: Thailand. Manufacturer part number 3401289.
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
Which vehicles does the Sunsong 3401289 fit?
It's a direct-fit replacement for the 1993-1995 Chevrolet Camaro [All] and 1993-1995 Pontiac Firebird [All]. See the Buyer's Guide tab to confirm your vehicle.
What is this power steering pressure line made of?
The hose uses CSM hose material and is built to exceed OE performance standards, with a 1,500 psi max working pressure and an 8,700 psi burst rating.
Are mounting brackets or hardware included?
No. The catalog lists mounting brackets, mounts, inserts, retainer clips, sleeves, washers, bushings, and switch port as not included; transfer or replace any hardware as directed by the vehicle service procedure.
What does a power steering pressure line hose do?
It carries pressurized power steering fluid from the pump to the steering gear so the system can provide steering assist.
What are signs the pressure line may need replacing?
Power steering fluid leaks, a whine during turns, or heavy, hard steering can be signs. If a failed pressure line is the cause, this assembly replaces it.
Write a Review