Keep power-assisted steering firm and leak-free with the Sunsong Power Steering Pressure Line Hose Assembly 3401297, the high-pressure line that carries fluid from the pump to the steering gear. It drops in as a direct-fit replacement for the 1984-1989 Ford Bronco II and 1984-1989 Ford Ranger (see the Buyer's Guide tab for engine-level fitment). This is the pump-to-gear pressure line — the section that sees the full output of the power steering pump, where age-cracked hose or weeping crimp fittings show up as fluid loss, a low reservoir, or hard/whining steering.
- Pre-assembled with brackets: ships ready to install, cutting labor time versus replacing individual hoses.
- Precision engineered to fit: includes the additional components needed to restore the wearable parts to original condition.
- High-pressure rating: Sunsong lists a 1,500 psi max working pressure, an 8,700 psi burst rating, and 1,600 lb tensile strength for exceptional durability.
- Factory pressure-tested: every pressure hose is subjected to a high-pressure quality-assurance test before leaving the factory.
Sunsong is a vertically integrated maker of automotive fluid-transfer hoses and lines, built to meet and exceed industry quality standards.
Interchange: 36-356060 · 979-1031
36356060 · 9791031 · 35606 · 71244 · E3TZ3A719C · E3TZ3A719D · E97A3A719CA · 356060 · 71919 · 4117 · 13401297
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
What does this hose assembly do?
It's the high-pressure line that carries power steering fluid from the pump to the steering gear on the listed applications.
Which vehicles does it fit?
It's a direct-fit replacement for the 1984-1989 Ford Bronco II and 1984-1989 Ford Ranger. Check the Buyer's Guide tab to confirm engine-level fitment for your vehicle.
Does it come with brackets?
Yes. The assembly is pre-assembled with brackets so it installs ready to go, reducing labor time compared with individual replacement hoses.
What pressure is it rated for?
Sunsong lists a maximum working pressure of 1,500 psi, a burst pressure rating of 8,700 psi, and a tensile strength of 1,600 lb.
What are signs this line may need replacing?
Fluid leaks or seepage at the hose or fittings, a low reservoir, or hard or whining steering can indicate a failed pressure line. Diagnose the cause before replacing.
Write a Review