Route high-pressure power steering fluid from the pump to the steering gear with the Sunsong Power Steering Pressure Line Hose Assembly 3401319. It drops in as a direct-fit replacement for the 1994-1996 Chevrolet Caprice and 1994-1996 Chevrolet Impala — see the Buyer's Guide tab for engine-level details. Sunsong, a vertically integrated maker of automotive fluid-transfer hoses and lines, builds this assembly to deliver exact form, fit, and function.
- Pre-assembled with brackets: the pressure and return hoses arrive ready to install, cutting labor time versus replacements sold as individual hoses.
- Precision engineered: includes the additional components needed to restore all wearable parts to original condition.
- Built to exceed OE performance: pressure hoses rated to a 1,500 psi max working pressure, an 8,700 psi burst pressure, and 1,600 lb tensile strength for durability and long life.
- Quality tested: every pressure hose passes a high-pressure quality assurance test before leaving the factory.
If a cracked, leaking, or chafed pressure hose is behind hard steering or fluid loss on your Caprice or Impala, this assembly replaces it.
Interchange: 36-367690 · 2647-273059 · 979-3131
36367690 · 2647273059 · 9793131 · 36769 · 91780 · 367690 · 26034742 · 72505 · 179 · 13401319
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
What does this power steering pressure line hose assembly do?
It carries pressurized fluid from the power steering pump to the steering gear. This Sunsong 3401319 assembly replaces a cracked, leaking, or worn original hose.
Which vehicles does the Sunsong 3401319 fit?
It is a direct-fit replacement for the 1994-1996 Chevrolet Caprice and 1994-1996 Chevrolet Impala. Check the Buyer's Guide tab to confirm fitment for your vehicle.
Does it come pre-assembled?
Yes. The pressure and return hoses are pre-assembled with brackets and include the additional components needed to restore wearable parts, reducing installation labor time.
What are the hose's pressure ratings?
The pressure hose is rated to a 1,500 psi max working pressure, an 8,700 psi burst pressure, and 1,600 lb tensile strength, and it passes a high-pressure test before leaving the factory.
What are signs this pressure hose may need replacing?
Power steering fluid leaks, a low reservoir, hard or noisy steering, or a visibly cracked or chafed hose. Diagnose the cause before replacing, as other parts can share these symptoms.
Write a Review