Keep power-assisted steering firm and responsive with the Sunsong Power Steering Pressure Line Hose Assembly 3401699. This pressure line carries pressurized power steering fluid from the pump toward the steering gear, and it drops in as a direct-fit replacement for the 1997-2004 Chevrolet Corvette (All).
- High-pressure rated: the pressure hose is rated to a 1,500 psi max working pressure, an 8,700 psi burst pressure, and 1,600 lb tensile strength for durability and long life.
- Male O-Ring fittings: Male O-Ring connections on both ends, with End 1 sized at 16 mm and End 2 at 18 mm.
- CSM hose, 637 mm: made with CSM hose material and an overall length of 637 mm (25.1 in).
- Factory tested: every pressure hose is subjected to a high-pressure quality-assurance test before it leaves the factory.
Bracket Included: No, and this assembly does not include a switch port. If a leaking or worn pressure line is the cause of your steering fluid loss, this replaces it. Made in Thailand.
Manufacturer part number 3401699.
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
What vehicle does this hose fit?
It is a direct-fit replacement for the 1997-2004 Chevrolet Corvette (All). Confirm fitment for your vehicle in the Buyer's Guide tab.
What are the pressure ratings?
The pressure hose is rated to a 1,500 psi max working pressure, an 8,700 psi burst pressure, and 1,600 lb tensile strength.
What fittings does it use?
Both ends use Male O-Ring fittings, with End 1 sized at 16 mm and End 2 at 18 mm.
Does it include a bracket?
No. Bracket Included: No, and this assembly does not include a switch port.
What are signs this pressure line may need replacing?
Power steering fluid leaks, low fluid, a whine, or harder steering effort can be signs. Diagnose the cause first, since these symptoms can have other sources.
Write a Review