Keep high-pressure fluid moving from the pump to the steering gear with the Sunsong Power Steering Pressure Line Hose Assembly 3402371. This pressure line carries pressurized power steering fluid from the power steering pump to the steering gear, and it drops in as a direct-fit replacement for the 2008-2010 Ford Expedition, 2009-2010 Ford F-150, 2009 Ford F-350, 2009-2010 Ford Lobo, and 2008-2010 Lincoln Navigator — see the Buyer's Guide tab for engine-level fitment.
- Pre-assembled with brackets: the hose ships assembled with its brackets for easier installation and reduced labor time versus replacement hoses sold as individual pieces.
- Precision engineered to fit: includes the additional components needed so wearable parts are restored to original condition.
- Built to exceed OE performance: rated for a max working pressure of 1,500 psi, a burst pressure of 8,700 psi, and a tensile strength of 1,600 lb for exceptional durability.
- Factory tested: every pressure hose undergoes a high-pressure quality assurance test before leaving the factory for trouble-free operation.
If a leaking, cracked, or bulging original pressure line is the cause of steering fluid loss, hard steering, or whine, this assembly replaces it. Sunsong is a vertically integrated manufacturer of automotive fluid transfer hoses and lines.
Interchange: 36-365786 · 2647-498202 · 979-4123
36365786 · 2647498202 · 9794123 · 37458 · 92383 · 92383E · 9L3Z3A719E · 9L3Z3A719G · AL3Z3A719A · AL3Z3A719F · 365786 · 76797 · 55011 · 13402371
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
What does this power steering pressure line hose do?
It carries high-pressure power steering fluid from the pump to the steering gear. If a leaking or cracked original line is your problem, this assembly replaces it.
Which vehicles does the Sunsong 3402371 fit?
It's a direct-fit replacement for the 2008-2010 Ford Expedition, 2009-2010 Ford F-150, 2009 Ford F-350, 2009-2010 Ford Lobo, and 2008-2010 Lincoln Navigator. Check the Buyer's Guide tab.
Does it come with brackets?
Yes. The hose is pre-assembled with its brackets for easier installation and reduced labor time compared with replacement hoses sold as individual pieces.
What are the pressure ratings?
The pressure hose is rated for a max working pressure of 1,500 psi, a burst pressure of 8,700 psi, and a tensile strength of 1,600 lb.
Is each hose tested before shipping?
Yes. Every pressure hose undergoes a high-pressure quality assurance test before leaving the factory for trouble-free installation and operation.
Write a Review