Keep power-assisted steering firm and leak-free with the Sunsong Power Steering Pressure Line Hose Assembly 3402416, a direct-fit replacement that routes high-pressure fluid from the pump to the rack on the 2006-2010 Hyundai Sonata. This assembly carries pressurized power steering fluid, so cracked, weeping, or ballooning hose signals it's time to replace the line.
- Pump-to-rack pressure line: The pressure hose connects the power steering pump to the steering rack, delivering the hydraulic pressure that provides steering assist.
- Pre-assembled with brackets: Comes ready to install with its brackets, helping reduce labor time compared with replacements sold as individual hoses.
- Built to exceed OE performance: Rated for a max working pressure of 1,500 psi, a burst pressure of 8,700 psi, and a tensile strength of 1,600 lb for exceptional durability and long life.
- Factory pressure-tested: Every pressure hose passes a high-pressure quality assurance test before leaving the factory for trouble-free installation and operation.
Sunsong precision engineers its fluid-transfer lines to fit right and includes the additional components needed to restore the wearable parts to original condition.
Interchange: 831-0005
8310005 · 37492 · 92417 · 365824 · 575103K000 · 13402416 · 76723 · 55073 · PSH0320 · PSK0320
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
What vehicle does this hose fit?
It is a direct-fit replacement for the 2006-2010 Hyundai Sonata. Check the Buyer's Guide tab to confirm it matches your specific vehicle.
What does this pressure line do?
It routes high-pressure power steering fluid from the pump to the steering rack, delivering the hydraulic pressure that provides steering assist.
What are the signs this hose needs replacing?
Fluid leaks, cracked or weeping hose, a ballooning section, or hard steering can indicate a failing pressure line. Diagnose the cause before replacing.
What are the pressure ratings?
The pressure hose is rated for a max working pressure of 1,500 psi, a burst pressure of 8,700 psi, and a tensile strength of 1,600 lb.
Does it come with brackets?
Yes. The assembly is pre-assembled with its brackets and includes the additional components needed to restore the wearable parts to original condition.
Write a Review