Route high-pressure power steering fluid from the pump to the hydroboost unit with the Sunsong Power Steering Pressure Line Hose Assembly 3402892. This pump-to-hydroboost pressure line drops in as a direct-fit replacement for the 2011-2019 Chevrolet Silverado 2500 HD and 3500 HD and the 2011-2019 GMC Sierra 2500 HD and 3500 HD (see the Buyer's Guide tab for engine details).
- Pre-assembled with brackets: the pressure hose ships with its brackets already installed for easier fitting and reduced labor versus lines sold as individual pieces.
- Precision engineered to fit: built to exact fit and includes the additional components needed to restore the wearable parts to original condition.
- Exceeds OE pressure ratings: rated for a max working pressure of 1,500 psi, a burst pressure of 8,700 psi, and a tensile strength of 1,600 lb for durability and long life.
- Factory-tested: every pressure hose is subjected to a high-pressure quality-assurance test before leaving the factory.
Signs this line may need replacing include power steering fluid leaks at the hose or fittings, whining from the system, or hard steering. If a failed pressure line is the cause, this assembly replaces it.
Interchange: 40247 · 80810 · 352401 · 25858118 · 77038 · 5408 · 13402892
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
What does this hose assembly do?
It carries pressurized power steering fluid from the pump to the hydroboost unit on the listed trucks. It's the pump-to-hydroboost pressure line.
Which vehicles does the 3402892 fit?
It's a direct-fit replacement for the 2011-2019 Chevrolet Silverado 2500 HD and 3500 HD and the 2011-2019 GMC Sierra 2500 HD and 3500 HD. See the Buyer's Guide tab for engine details.
Does it come with brackets?
Yes. The pressure hose is pre-assembled with its brackets for easier installation and reduced labor compared with lines sold as individual hoses.
What are the pressure ratings?
It's rated for a max working pressure of 1,500 psi, a burst pressure of 8,700 psi, and a tensile strength of 1,600 lb, exceeding original equipment performance standards.
How do I know if this line has failed?
Look for power steering fluid leaks at the hose or fittings, system whine, or hard steering. Diagnose the cause first; if the pressure line is at fault, this assembly replaces it.
Write a Review