MOOG RK622646 front right lower control arm with ball joint for the 2011-2016 Hyundai Elantra and other vehicles locates the front right wheel and lets it move with the suspension. This MOOG control arm and ball joint assembly is engineered for structural strength and corrosion protection.
- Rubber bushings optimized for quiet operation and resistance to wear, salt, road grime and oils
- Ball joint with a sealed socket for maintenance-free operation
- Ball stud shaped for fatigue life
- Heat treated to inhibit premature failure
- Coated studs and an e-coated control arm to inhibit premature deterioration
Quick facts
- Part: MOOG RK622646 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2011-2016 Hyundai Elantra and other vehicles
- Position: Front right lower
- Material: Stamped steel arm, rubber bushings
- Condition: New
A clunk over bumps, uneven tire wear or loose steering can mean this arm is worn, though a worn sway bar link or strut mount can be behind the same signs. This listing is one arm for the front right; the front left is a separate part, and both sides are normally replaced together. The car takes one on each side of the front axle.
Fits
Among the vehicles this MOOG lower control arm fits are the 2011-2016 Hyundai Elantra, the 2013-2017 Hyundai Elantra GT and the 2012-2017 Hyundai Veloster.
Specifications
Fit and size
- Position: Front right lower
- Quantity per vehicle: 1 (this side)
- Ball joint mounting type: Press in
- Ball joint stud type: Threaded
- Adjustable: No
Build and materials
- Control arm material: Stamped steel
- Bushing material: Rubber
- Bushings and ball joint: included
- Grease fitting: not included
- Condition: New
- Country of origin: Turkey
In the box
One front right lower control arm with its bushings and ball joint. A grease fitting is not included.
Installation notes
- The ball joint comes pre-installed in the arm.
- Precision tolerances are intended to make installation and steering alignment easier.
Interchange: 520-380 · 522-824
45D10721 · 2703497307 · 1027583 · TC2738 · CB60304PR · CB60414PR · CB60424PR · CA16361 · 545012V000 · 545013X000 · 545013X700 · 545013Y000 · 54501F2000 · 5CB901143 · CB60304 · CMS861117 · CMS901105 · JTC2743
This part cross-references / interchanges with the following part numbers:
45D10721, 2703497307, 1027583, TC2738, 520-380, 522-824, CB60304PR, CB60414PR, CB60424PR, CA16361, 545012V000, 545013X000, 545013X700, 545013Y000, 54501F2000, 5CB901143, CB60304, CMS861117, CMS901105, JTC2743
Frequently Asked Questions
Is this the right Hyundai Elantra control arm for a 2011-2016 Hyundai Elantra?
Yes. MOOG RK622646 is the front right lower arm for the 2011-2016 Hyundai Elantra. If your car is another model, look it up in the "Vehicles it fits" section. The left side is a separate part.
Does the MOOG control arm bushing come with the arm?
Yes. MOOG RK622646 includes the rubber bushings and a pre-installed ball joint. A grease fitting is not included.
What is the MOOG lower control arm bushing material on this arm?
The bushings are rubber and the arm is stamped steel. Salt, road grime and oils are among the things the bushings are made to resist.
Does the ball joint on this arm need greasing?
No. The socket is sealed for maintenance-free operation, so no grease fitting comes with this arm.
Does MOOG RK622646 replace 545012V000?
Yes. 545012V000 is one of the numbers this arm replaces, and it appears with the other cross-references on the Interchange line.
