Dorman 520-312 front right upper control arm with ball joint for the 1997-1999 Dodge Dakota and other vehicles connects the steering knuckle to the vehicle. This Dorman control arm also carries the ball joint that the knuckle pivots on.
- Pre-installed ball joint and bushings save time and labor
- Steel control arm, casting/forged construction, with rubber bushings
- Additional coatings resist rust and corrosion
- Tested for a smooth, stable ride and directional stability
- Dorman OE Solutions line, standard replacement grade
Quick facts
- Part: Dorman 520-312 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 1997-1999 Dodge Dakota and other vehicles
- Position: Front right upper
- Material: Steel control arm, rubber bushings
- Condition: New
A clunk over bumps, uneven tire wear or loose steering can come from a worn ball joint or worn bushings, but the cause may be elsewhere, so look for it first. With the engine off, look for cracked or torn bushings and for rust or damage on the arm; a shop can measure ball joint play. Both front upper arms are normally replaced together, and this listing is one arm.
Fits
This control arm is a direct replacement for the original equipment on the 1997-1999 Dodge Dakota and the 1998-1999 Dodge Durango. Each takes one for the front right upper position, and the left side is a separate part.
Specifications
Fit and size
- Position: Front right upper
- Quantity per vehicle: 1 (this side)
- Mounting hole diameter: 12.3 mm
- Ball joint thread diameter: 14 mm
- Maximum length: 237 mm
- Maximum width: 288.5 mm
Build and materials
- Control arm type: Casting/Forged
- Control arm material: Steel
- Bushing material: Rubber
- Ball joint stud: Threaded
- Grade: Standard replacement
- Condition: New
- Country of origin: Taiwan
In the box
One control arm with ball joint and bushings installed, plus mounting hardware.
Installation notes
- The ball joint comes pre-greased.
- No grease fitting is included.
Interchange: 5166346AA · 52039410 · 52039410AB · TC6558 · CA10199 · CK620262 · RK620262 · FA3024 · GS25103 · CMS25103 · 2605918 · 3CB25044 · SRK620262 · 1506038 · JTC2345
This part cross-references / interchanges with the following part numbers:
5166346AA, 52039410, 52039410AB, TC6558, CA10199, CK620262, RK620262, FA3024, GS25103, CMS25103, 2605918, 3CB25044, SRK620262, 1506038, JTC2345
Frequently Asked Questions
Is this front right upper control arm the one for the 1997-1999 Dodge Dakota?
Yes. Dorman 520-312 is the front right upper control arm for the 1997-1999 Dodge Dakota. The left side takes a separate part.
Is this front right upper control arm the one for the 1998-1999 Dodge Durango?
Yes. This arm fits the 1998-1999 Dodge Durango at the front right upper position. The left side is a separate part.
Are the Dorman control arm bushings already installed on this arm?
Yes. On Dorman 520-312 the rubber bushings and the ball joint come pre-installed, and mounting hardware is included.
Is the Dorman suspension control arm and ball joint assembly pre-greased?
Yes. The ball joint is pre-greased, and this control arm has no grease fitting. The ball joint stud is threaded, with a 14 mm thread.
What size is the Dorman 520-312 control arm?
The arm is 237 mm long and 288.5 mm wide at its maximum, with a 12.3 mm mounting hole. It is made of steel with rubber bushings.
