Dorman - OE Solutions Suspension Control Arm and Ball Joint Assembly P/N:520-520
Built with a smooth ride and predictable handling in mind, the Dorman - OE Solutions Control Arm with Ball Joint 520-622 is a front right upper replacement for the 1998-2002 Honda Accord, 2001-2003 Acura CL and 1999-2003 Acura TL. It directly replaces the original assembly on these listed applications. See the "Vehicles it fits" section for engine details.
A control arm links the wheel's steering knuckle to the vehicle body through its ball joint and bushings. This lets the suspension travel over the road while keeping the wheel located. Dorman put this control arm through an industry-leading evaluation process that targets directional stability and predictable dynamics.
Because it ships as a Dorman suspension control arm and ball joint assembly, you replace the arm, joint and bushings in one job. Signs the arm may need replacing include clunking over bumps, loose or wandering steering, uneven tire wear, and a worn ball joint or cracked bushings. Diagnose the cause before replacing any parts. Replacing the left-side arm at the same time is recommended for even handling, and a wheel alignment is advised after installation.
Interchange: 102-4855 · 810-71189B · 623.40025
1024855 · 81071189B · 62340025 · TC2083 · CA8433 · 51450S1AE01 · 51450S84A01 · 3CB60051 · CK620285 · RK620285 · FA4307 · GS9672 · CMS9672 · 2605302 · 2605434 · SRK620285 · 51450S84A01R · JTC694
This part cross-references / interchanges with the following part numbers:
Is this a 1998-2002 Honda Accord control arm for the right side?
Yes. Part 520-622 is a front right upper arm for the 1998-2002 Honda Accord. See the "Vehicles it fits" section for the full fitment chart.
Does it also work as a 1999-2003 Acura TL control arm?
Yes, it fits the 1999-2003 Acura TL in the front right upper position. Check the "Vehicles it fits" section for engine details.
What comes pre-installed on this arm?
The ball joint and bushings come pre-installed on the arm, so there is no need to source or fit them separately.
What signs mean the control arm may need replacing?
Clunking over bumps, loose or wandering steering, uneven tire wear, or cracked bushings can indicate wear. Inspect the suspension to confirm the cause before replacing parts.
Is an alignment needed after installation?
A wheel alignment is generally recommended after replacing a control arm. Follow the vehicle service information for torque specs and procedures.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.