Dorman 522-470 front right upper control arm with ball joint for the 2003-2007 Cadillac CTS links the steering knuckle to the frame. Its ball joint lets the wheel pivot as the suspension moves and steers. This Dorman control arm was tested for ride smoothness, directional stability and predictable dynamics, and it is sold as one assembly with the ball joint.
- Ball joint and rubber bushings come pre-installed on the arm
- Pre-greased ball joint with a pinch-type stud and 14 mm thread diameter
- Stamped aluminum control arm
- Additional coatings for rust and corrosion resistance
- Dorman OE Solutions product line, standard replacement grade
Quick facts
- Part: Dorman 522-470 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2003-2007 Cadillac CTS
- Position: Front right upper
- Material: Aluminum control arm, rubber bushings
- Condition: New
A clunk over bumps, wandering steering or uneven front tire wear can mean the control arm and ball joint assembly is worn, but tie rods, struts and other suspension parts can cause similar signs. Before ordering, look the arm over with the engine off for cracked or torn bushings and rust or damage at the ball joint.
Fits
It is a direct replacement for the original equipment on the 2003-2007 Cadillac CTS.
Specifications
Fit and size
- Position: front right upper
- Quantity per vehicle: 1
- Mounting hole: 1, 12.4 mm diameter
- Control arm maximum width: 288.5 mm
- Control arm maximum length: 237 mm
- Ball joint thread diameter: 14 mm
Build and materials
- Control arm type: stamped
- Control arm material: aluminum
- Bushing material: rubber
- Ball joint stud type: pinch
- Pre-greased: yes
- Grade: standard replacement
- Condition: new
- Country of origin: China
In the box
One control arm with ball joint, with the ball joint and bushings pre-installed and mounting hardware included. This listing is one arm for the front right upper position, which takes one on the 2003-2007 Cadillac CTS; the front left is a separate part, ordered separately, and the two are normally replaced together. A grease fitting is not included.
Interchange: CA8760 · 25696751 · 25752929 · 25760096 · RK623985 · GS50193 · CMS50193 · 2607579 · 3CB50136 · SMS50193
This part cross-references / interchanges with the following part numbers:
CA8760, 25696751, 25752929, 25760096, RK623985, GS50193, CMS50193, 2607579, 3CB50136, SMS50193
Frequently Asked Questions
Is this the 2003-2007 Cadillac CTS control arm for the left or right side?
Dorman 522-470 is for the front right upper position of the 2003-2007 Cadillac CTS. The front left upper arm is a separate part.
Does this Dorman upper control arm come with the ball joint and hardware?
Yes, Dorman 522-470 comes with the ball joint and bushings pre-installed, and mounting hardware is included. A grease fitting is not included.
Are the Dorman control arm bushings rubber?
Yes, the bushings are rubber and come pre-installed on this stamped aluminum arm.
How can I tell if the bushings or ball joint on this control arm are worn?
With the engine off, look for cracked or torn rubber bushings and damage around the ball joint. Looseness you feel in the steering is worth having a shop inspect.
What is the ball joint stud size on this front upper control arm?
The ball joint has a pinch-type stud with a 14 mm thread diameter, and the arm has one 12.4 mm mounting hole. The ball joint comes pre-greased.
