Dorman 521-712 front right lower control arm with ball joint for the 2005-2006 Honda Odyssey links the front wheel to the vehicle and lets it move with the suspension. This Dorman control arm replaces the arm and its ball joint in one piece.
- Ball joint and bushings pre-installed to save time and labor
- Tested for a smooth, stable ride and predictable dynamics
- Additional coatings for rust and corrosion resistance
- Iron arm with rubber bushings and a threaded ball joint stud
- Pre-greased
Quick facts
- Part: Dorman 521-712 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2005-2006 Honda Odyssey
- Position: Front right lower
- Material: Iron
- Condition: New
A worn lower control arm or ball joint can show up as a clunk over bumps, loose or wandering steering, or uneven front tire wear. A worn tie rod end can also loosen steering, so these signs alone do not prove the arm is the problem.
Fits
This control arm is a direct replacement for the original equipment on the 2005-2006 Honda Odyssey. This listing is one arm for the front right; the front left is a separate part, and both are normally replaced together. The 2005-2006 Honda Odyssey takes one on this side.
Specifications
Fit and size
- Position: Front right lower
- Quantity per vehicle: 1
- Mounting hole diameter: 12.3 mm
- Ball joint thread diameter: 14 mm
- Maximum width: 288.5 mm
- Maximum length: 237 mm
Build and materials
- Control arm material: iron
- Construction: casting/forged
- Bushing material: rubber
- Ball joint stud: threaded
- Pre-greased: yes
- Grease fitting: not included
- Condition: New
- Country of origin: Thailand
In the box
One control arm and mounting hardware.
Interchange: 102-6449 · 810-53847B · 623.40026
TC5184 · CA14418 · 51350SHJA01 · 5CB60098 · RK620504 · GS60121 · CMS60121 · 2605945 · SK521712 · 1509036 · X17CJ0099 · JTC2444
This part cross-references / interchanges with the following part numbers:
102-6449, 810-53847B, 623.40026, TC5184, CA14418, 51350SHJA01, 5CB60098, RK620504, GS60121, CMS60121, 2605945, SK521712, 1509036, X17CJ0099, JTC2444
Frequently Asked Questions
Is this the right control arm for the 2005-2006 Honda Odyssey?
Yes. Dorman 521-712 is the front right lower control arm for the 2005-2006 Honda Odyssey. The front left side takes its own separate arm.
Does this Dorman suspension control arm and ball joint assembly come pre-greased?
Yes. Dorman 521-712 comes pre-greased and does not include a grease fitting.
Are the Dorman control arm bushings already installed?
Yes. The rubber bushings and the ball joint are pre-installed in this control arm, and mounting hardware is included in the package.
What is the ball joint thread size on this Dorman lower control arm?
The threaded ball joint stud on Dorman 521-712 has a 14 mm thread diameter. The mounting hole measures 12.3 mm.
What material is this front right control arm made of?
The arm is iron, casting/forged, with rubber bushings. Additional coatings add rust and corrosion resistance.
