Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC3422
$109.99
(You save)
Replace a worn arm and ball joint in one step with the Delphi control arm TC3422, a front right lower suspension control arm with an integrated ball joint that locates the wheel and lets it pivot through steering and travel. It installs as a direct-fit replacement for the 2007-2011 Suzuki SX4 — see the Buyer's Guide tab for engine-level fitment.
OE-validated durability: Delphi tests to the extreme, with parts withstanding temperatures below -40°C and over 120°C plus 720 hours of salt spray, and extensive dimensional and material analysis for the best OE-to-aftermarket compatibility.
100% inspected: every control arm undergoes crack detection and ultrasonic flaw detection so materials match OE specifications.
Machined ball stud: studs are machined to micron tolerances for durability and smooth joint operation.
Robot-welded & protected: robot welding delivers consistent quality, and anti-corrosion protection is applied to each part for corrosion prevention and enhanced aesthetics.
If a worn front right lower control arm or ball joint is behind clunking over bumps, loose steering, or uneven tire wear, this assembly replaces those parts in one unit. Have your alignment checked after installation.
It's a direct-fit replacement for the 2007-2011 Suzuki SX4. Check the Buyer's Guide tab to confirm engine-level fitment for your exact vehicle.
Is this a complete control arm and ball joint assembly?
Yes. It combines the arm and its ball joint in one unit, so you replace both components together.
What position on the vehicle is this lower arm?
This is the front right (passenger side) lower control arm. If you also need the left side, order the matching part for that position.
What are signs this lower arm may need replacing?
Clunking over bumps, loose or wandering steering, and uneven tire wear can point to a worn control arm or ball joint. Diagnose the cause before replacing.
Do I need an alignment after installing this control arm?
Yes, an alignment is recommended after replacing a control arm, since the change can affect wheel angles. Have the alignment checked by a qualified shop.
Write a Review
Delphi
Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC3422
Steer with confidence and quiet the front suspension with the Delphi Control Arm with Ball Joint TC5025, a front left upper control arm and ball joint assembly. This Ford Fusion control arm installs...
Steer with confidence on a genuine Delphi control arm — the Suspension Control Arm and Ball Joint Assembly TC3429, a direct-fit front right lower unit for the 2013-2018 Toyota RAV4, 2015-2017 Lexus...
Delphi's OE safety technology is fitted to millions of vehicles worldwide and we apply Delphi's OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at...
Keep your steering tight and your tires tracking true with the DELPHI control arm and ball joint assembly, part number TC4408. This front left lower unit drops in as a direct-fit replacement for the...
Bring the Delphi control arm and ball joint assembly TC3054 online as the front right upper suspension link, locating the wheel while its integrated ball joint lets the knuckle steer and travel...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
