Rear Lower Control Arm with Ball Joint for 2010-2018 Toyota RAV4 & More - Delphi TC5570

$105.99
WARNING:California Proposition 65▾

Vehicles this part fits

    $105.99
    Adding to cart… The item has been added

    Have questions?

    Part number: TC5570
    UPC: 689604301098
    Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC5570
    Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC5570
    $105.99
    $105.99

    Delphi TC5570 rear lower control arm with ball joint for the 2010-2018 Toyota RAV4 and other vehicles joins the wheel to the vehicle and lets the wheel pivot at the joint. This control arm and ball joint assembly comes as one unit, so the arm and joint are replaced together.

    • Withstands temperatures below -40 degrees C and over 120 degrees C and is exposed to 720 hours of salt spray in testing
    • Every Delphi control arm goes through 100% crack detection and ultrasonic flaw detection
    • Ball studs machined to micron tolerances for durability and smooth joint operation
    • Robot-welded arm for consistent performance and quality
    • Anti-corrosion protection applied to each part

    Quick facts

    • Part: Delphi TC5570 control arm with ball joint
    • Also called: control arm and ball joint assembly
    • Fits: 2010-2018 Toyota RAV4 and other vehicles
    • Position: Rear lower forward
    • Condition: New

    A clunk over bumps, uneven tire wear or a loose, wandering feel can mean the arm or its joint is worn. Worn shocks, a loose sway bar link or a tired wheel bearing can make similar noises or wear, so find the source before you buy.

    Fits

    It is a rear control arm for the 2010-2018 Toyota RAV4, in the lower forward position, and it also fits the 2015-2021 Lexus NX300h and the 2018-2021 Lexus NX300. If your car is not one of these, open the "Vehicles it fits" section and check your exact model and engine. Two go on the rear axle, one per side; this listing is one arm, and the other side of the axle is normally done at the same time.

    Specifications

    Fit and size

    • Position: rear lower forward
    • Quantity per vehicle: 2, one per side of the rear axle
    • Sold: individually, one arm per listing

    Build and materials

    • Type: control arm with ball joint, robot-welded
    • Ball studs: machined to micron tolerances
    • Finish: anti-corrosion protection on each part
    • Condition: new

    Interchange: 48710-0R030 · 48710-42030
    KSC4215 · LA74845 · RK621848 · CMS861281

    This part cross-references / interchanges with the following part numbers:

    KSC4215, LA74845, RK621848, CMS861281, 48710-0R030, 48710-42030

    Frequently Asked Questions

    Is the Delphi TC5570 a control arm for the 2010-2018 Toyota RAV4?

    Yes, the Delphi TC5570 is a rear lower forward control arm with ball joint for the 2010-2018 Toyota RAV4; for other models, open the "Vehicles it fits" section and check your car.

    Is this a lower control arm for the 2010-2018 Toyota RAV4, or an upper one?

    It is a lower arm. The Delphi TC5570 sits in the rear lower forward position.

    How is the Delphi TC5570 control arm built to handle heat, cold and salt?

    These arms withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Anti-corrosion protection is applied to each part.

    What can show a rear lower control arm with a ball joint is due for replacement?

    Cracks or heavy rust on the arm can mean it is due. While driving, a clunk over bumps or uneven tire wear can point the same way, and a shop can test the joint.

    Does the Delphi TC5570 replace part number 48710-0R030?

    Yes. 48710-0R030 is one of the numbers listed as an interchange for the Delphi TC5570 rear lower control arm with ball joint.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review