Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS20419
Mevotech Supreme CMS101428 front right lower control arm with ball joint for the 2006-2007 Mercedes-Benz C280 and other vehicles links the steering knuckle to the chassis. This Mevotech Supreme suspension control arm is a control arm and ball joint assembly with bushings included.
A worn lower arm can show up as a clunk over bumps, uneven tire wear or a loose feel in the steering. Other suspension parts can produce similar symptoms, so pin down the source before replacing the arm: with the car parked and the engine off, look at the bushings for cracks or tears, and leave ball joint play testing to a shop.
The 2006-2007 Mercedes-Benz C280, the 2006-2007 Mercedes-Benz C350 and the 2003-2005 Mercedes-Benz C240 are among the cars this arm fits, and it is a direct-fit replacement for them, made to equal or beat OE specifications. The front axle takes one arm on each side; this listing is the right one, and the front left is a separate part that is normally replaced at the same time.
Fit and size
Build and materials
One control arm with ball joint and bushings.
Interchange: 524-080
19357033 · QGS101428 · TC5801 · CB28394 · CB28394PR · CA14568 · 5CB10641 · RK622042 · C6GS101428 · 2033300407 · A2033300407 · GS101428 · 2608256 · 1824101 · 30036371 · X31CJ7676 · JTC2631
This part cross-references / interchanges with the following part numbers:
Is the Mercedes C240 control arm CMS101428 right for a 2003-2005 Mercedes-Benz C240?
Yes. Mevotech Supreme CMS101428 is a front right lower control arm that fits the 2003-2005 Mercedes-Benz C240. The left side is a separate part ordered on its own.
Will this Mercedes-Benz C280 control arm work on the right front of a 2006-2007 C280?
Yes. Mevotech Supreme CMS101428 is the front right lower arm for the 2006-2007 Mercedes-Benz C280. If your car is another Mercedes-Benz, look up its year and model in the "Vehicles it fits" section.
What is this Mevotech Supreme lower control arm made of?
The control arm is steel with rubber bushings, and the ball joint stud is threaded. The protective surface treatment on the arm is there to prevent rust build-up.
Are bushings and a locking nut included with CMS101428?
Yes. Mevotech Supreme CMS101428 includes bushings, and a part-specific nylon locking nut is provided for the ball joint.
Does Mevotech Supreme CMS101428 replace number A2033300407?
Yes. A2033300407 is among the numbers this front right lower control arm replaces; the other numbers are on the Interchange line.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.