Dorman 520-302 front right lower control arm with ball joint for the 1995-2006 Dodge Stratus and other vehicles joins the steering knuckle to the chassis. This Dorman suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications.
- Part of the Dorman OE Solutions line
- Ball joint and bushings come pre-installed, which saves time and labor
- Tested for a smooth, stable ride and directional stability
- Additional coatings for rust and corrosion resistance
- Pre-greased ball joint with a threaded stud, 14 mm thread diameter
Quick facts
- Part: Dorman 520-302 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 1995-2006 Dodge Stratus and other vehicles
- Position: Front right lower
- Material: Iron control arm, rubber bushings
- Condition: New
A clunk over bumps, uneven tire wear or loose, wandering steering can mean a worn ball joint or bushing. A strut mount, sway bar link or tie rod end can be behind these signs too, so find which part is at fault before you buy. Plan to replace both front arms together; this listing is a single arm for the right side, so the left one is ordered separately.
Fits
As a front right lower control arm with ball joint, it suits the 1995-2006 Chrysler Cirrus and the 1996-2006 Chrysler Sebring as well. The 1995-2006 Chrysler Cirrus takes one on this side. Owners of other models can look up their car's years under the "Vehicles it fits" section.
Specifications
Fit and size
- Position: front right lower
- Quantity per vehicle: 1 on this side
- Mounting hole diameter: 12.3 mm
- Ball joint thread diameter: 14 mm
- Maximum width: 288.5 mm
- Maximum length: 237 mm
Build and materials
- Type: casting/forged
- Control arm material: iron
- Bushing material: rubber
- Ball joint stud: threaded, pre-greased
- Grade: standard replacement
- Condition: new
- Country of origin: China
In the box
One control arm with ball joint, with bushings and mounting hardware. A grease fitting is not included.
Interchange: 810-94339B · 623.63043 · 4616922-R
4616922 · 4764500AC · 4764500AD · 4764500AE · 4764500AF · 4764500AG · K7427 · TC5352 · CA7446 · CK7427 · RK7427 · 5CB25223 · FA4128 · GK7427 · CMK7427 · 2605254 · 2605254M · 5CB25006 · SRK7427 · X09CJ1369 · JTC1276
This part cross-references / interchanges with the following part numbers:
810-94339B, 623.63043, 4616922, 4764500AC, 4764500AD, 4764500AE, 4764500AF, 4764500AG, K7427, TC5352, CA7446, CK7427, RK7427, 5CB25223, FA4128, GK7427, CMK7427, 2605254, 2605254M, 5CB25006, SRK7427, 4616922-R, X09CJ1369, JTC1276
Frequently Asked Questions
Does this Dorman lower control arm fit the 1995-2006 Chrysler Cirrus?
Yes. Dorman 520-302 fits the 1995-2006 Chrysler Cirrus on the front right lower side; the front left takes a separate arm.
Are the Dorman control arm bushings already installed on this arm?
Yes. Dorman 520-302 comes with the ball joint and rubber bushings pre-installed, plus mounting hardware. A grease fitting is not included.
What kind of ball joint stud does this Dorman suspension control arm have?
This arm's ball joint has a threaded stud with a 14 mm thread diameter and comes pre-greased.
Can a clunk over bumps mean the front right control arm is worn?
Yes, it can. A clunk over bumps, uneven tire wear or wandering steering may point to a worn ball joint or bushing, and a shop can check for play.
What is this Dorman control arm made of?
Dorman 520-302 has an iron arm of casting/forged type with rubber bushings. Added coatings resist rust and corrosion.
