Mevotech TTX Suspension Control Arm and Ball Joint Assembly P/N:CTXMS20268
Mevotech TTX CTXMS251008 front left upper control arm with ball joint for the 2007-2023 Dodge Charger and other vehicles locates the front left wheel and carries a pre-assembled ball joint. Also called a control arm and ball joint assembly, it covers the arm, bushings and ball joint in one piece.
A clunk over bumps, uneven tire wear or loose steering can mean a worn ball joint, bushing or arm. Other suspension parts can give similar signs, so with the engine off, look at the boot for tears and grease seepage and the bushings for cracks before replacing the arm. This listing is one arm for the front left upper position; the right side is its own part, and the pair is normally replaced together.
The 2007-2023 Dodge Charger, the 2005-2023 Chrysler 300 and the 2017-2023 Dodge Challenger take this control arm with ball joint, and so do more models. Owners of other cars can look up their year and model in the "Vehicles it fits" section.
Fit and size
Build and materials
One control arm with the ball joint, bushings and dust boot, plus the slotted castle nut, Easy Snap cotter pin and grease fitting.
Interchange: 19474050 · 4895669AB
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a front left upper control arm for the 2007-2023 Dodge Charger?
Yes. Mevotech TTX CTXMS251008 is the front left upper control arm with ball joint for the 2007-2023 Dodge Charger; the front right upper is a separate part.
Can I use this control arm on a 2005-2023 Chrysler 300?
Yes. This arm is for the front left upper position of the 2005-2023 Chrysler 300, and the right side takes its own arm.
Does the ball joint on this arm come with a castle nut and cotter pin?
Yes. The slotted castle nut and Easy Snap cotter pin come with it, along with the bushings, dust boot and a grease fitting.
Is the Mevotech TTX control arm greaseable?
Yes. Mevotech TTX CTXMS251008 is pre-greased and includes a 180 degree SAE grease fitting for later greasing.
What are the bearing and bushing materials in this front left upper control arm?
The control arm is steel, with rubber bushings, sintered metal bearings and a neoprene dust boot.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.