MOOG Chassis Products RK80408 front left lower control arm with ball joint for the 2004-2011 Ford Focus connects the front left wheel to the chassis. The 2004-2011 Ford Focus control arm, also called a control arm and ball joint assembly, comes with its bushings and ball joint.
- Coated studs and an e-coated control arm inhibit premature deterioration
- Induction-hardened studs and a patent-pending carbon fiber-reinforced bearing for longer socket life
- Rubber bushings made for quiet operation and resistance to wear, salt, road grime and oils
- Sealed ball joint socket, pre-greased
- Heat treated to inhibit premature failure
- Laser-etched ID on the arm marks genuine MOOG quality
Quick facts
- Part: MOOG Chassis Products RK80408 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2004-2011 Ford Focus
- Position: Front left lower
- Material: Stamped steel control arm, rubber bushings
- Condition: New
Clunking over bumps, loose steering or uneven front tire wear can mean the bushing or ball joint on a 2004-2011 Ford Focus suspension control arm is worn. A worn strut, tie rod end, sway bar link or tire can be behind these signs too, so find the cause before buying a part.
Fits
This is the 2004-2011 Ford Focus lower control arm for the front left. This listing is one arm; the front right is a separate part, and the two are normally replaced together on the same axle. The front axle takes one arm per side.
Specifications
Fit and size
- Position: front left lower
- Quantity per application: 1
- Maximum control arm length: 14 in
- Ball joint mounting type: bolt in
- Ball joint stud type: pinch
Build and materials
- Control arm material: stamped steel
- Bushing material: rubber
- Ball joint and bushings: included
- Pre-greased: yes
- Adjustable: no
- Condition: new
- Country of origin: China
In the box
One control arm with its ball joint and bushings, plus mounting hardware. A grease fitting is not included.
Installation notes
- The ball joint comes pre-installed and pre-greased.
- Precision tolerances are meant to ease installation and steering alignment.
Interchange: 810-232277B · 622.61005 · 520-489 · 260-5498
45D3291 · 62361005 · CB85263PR · CA8567 · K80408 · FK80408 · 4S4Z3079AA · 6S4Z3079AA · 7S4Z3079A · 8S4Z3079A · 9S4Z3079A · CB85263 · CB85403 · FA4394 · CMK80408 · MK80408 · 5071291 · 10980408 · JTC1552
This part cross-references / interchanges with the following part numbers:
45D3291, 810-232277B, 622.61005, 62361005, 520-489, CB85263PR, CA8567, K80408, FK80408, 4S4Z3079AA, 6S4Z3079AA, 7S4Z3079A, 8S4Z3079A, 9S4Z3079A, CB85263, CB85403, FA4394, CMK80408, MK80408, 260-5498, 5071291, 10980408, JTC1552
Frequently Asked Questions
Is RK80408 the right lower control arm for a 2007 Ford Focus in the 2004-2011 range?
Yes. MOOG Chassis Products RK80408 fits the 2004-2011 Ford Focus, 2007 included, and is the front left lower arm.
Which side is this 2008 Ford Focus lower control arm for, within the 2004-2011 range?
This one is for the front left. The front right arm is a separate part.
Does this control arm come with the ball joint and bushings?
Yes. The ball joint, bushings and mounting hardware are included. A grease fitting is not.
Is the MOOG RK80408 control arm steel or aluminum?
MOOG Chassis Products RK80408 is a stamped steel arm with rubber bushings and a bolt-in ball joint with a pinch stud.
Does MOOG RK80408 replace 8S4Z3079A?
Yes. 8S4Z3079A is one of the numbers on this control arm's interchange list, along with 7S4Z3079A and 9S4Z3079A.
