MOOG Chassis Products RK620372 front left lower control arm with ball joint for the 2005-2025 Nissan Frontier and other vehicles links the front left wheel to the frame and moves with the suspension. Also listed as a control arm and ball joint assembly, its ball joint pivots for steering.
- Optimized rubber bushings for quiet operation and resistance to wear, salt, road grime and oils
- Sealed ball joint socket for maintenance-free operation
- Ball stud shaped for fatigue life
- Heat treated to inhibit premature failure
- Coated studs and an e-coated steel arm to inhibit premature deterioration
Quick facts
- Part: MOOG Chassis Products RK620372 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2005-2025 Nissan Frontier and other vehicles
- Position: Front left lower
- Material: Stamped steel control arm, rubber bushings
- Condition: New
A clunk over bumps, uneven front tire wear or loose steering can point to a worn control arm bushing or ball joint. Other suspension parts produce similar symptoms, so with the engine off, check the bushings for cracks or tears and the arm for bends or rust; a shop can test ball joint play.
Fits
It is listed for a wide range of Nissan and Suzuki models. For Nissan Frontier control arm replacement it covers the 2005-2025 model years, and it fits the 2005-2012 Nissan Pathfinder and the 2005-2015 Nissan Xterra. If your car is not named here, look it up in the "Vehicles it fits" section. This listing is one arm for the front left; the front right is a separate part, and both are normally replaced together.
Specifications
Fit and size
- Position: front left lower
- Quantity per application: 1
- Control arm maximum length: 18.7 in
- Ball joint mounting type: press in
- Ball joint stud type: pinch
- Adjustable: no
Build and materials
- Control arm material: stamped steel
- Bushing material: rubber
- Pre-greased: yes
- Condition: new
- Country of origin: Taiwan
In the box
One front left lower control arm with its ball joint, rubber bushings and mounting hardware. This listing holds one arm; the front left takes one. A grease fitting is not included.
Installation notes
- The ball joint comes pre-installed and pre-greased.
- Precision tolerances are meant to ease installation and steering alignment.
Frequently Asked Questions
Is this Nissan Frontier control arm the right front left lower arm for the 2005-2025 model years?
Yes. MOOG Chassis Products RK620372 is listed for the front left lower position on the 2005-2025 Nissan Frontier. For another car, enter its year, make and model in the "Vehicles it fits" section.
Is this Nissan Frontier lower control arm replacement for the 2005-2025 model years good for the right side too?
No. MOOG RK620372 is the front left lower arm, and the front right is ordered as a separate part. The front left position takes one arm.
Do the ball joint, bushings and hardware come with the MOOG RK620372 arm?
Yes. The ball joint, rubber bushings and mounting hardware are included with the arm. A grease fitting is not included.
What is this front left lower control arm made of?
The control arm is stamped steel with an e-coat finish, and the bushings are rubber. The studs are coated as well.
How does the ball joint mount on this MOOG control arm?
It is a press-in ball joint with a pinch stud type, pre-installed and pre-greased in a sealed socket. Precision tolerances are meant to ease installation and steering alignment.
