MOOG Chassis Products Suspension Control Arm and Ball Joint Assembly P/N:RK622033
MOOG Chassis RK621756 front right upper control arm with ball joint for the 2000-2004 Dodge Dakota and other vehicles links the steering knuckle to the frame. The arm carries the ball joint and rubber bushings that let the wheel move with the suspension and steer.
A clunk over bumps, loose steering feel or uneven front tire wear can mean a worn arm or ball joint, but other suspension parts wear in similar ways. Before replacing it, look with the engine off for cracked or split rubber bushings and grease seeping from the ball joint.
This arm fits the 2000-2004 Dodge Dakota and the 2000-2003 Dodge Durango.
Fit and size
Build and materials
One front right upper control arm with ball joint, bushings, grease fitting and mounting hardware. This listing holds one arm, and the front right position takes one. The front left is its own part, ordered separately, and the two sides are normally replaced together.
Interchange: 521-784 · 502-1319
45D10500 · 5166384AA · 52106160AA · 52106160AB · 52106160AC · 52106160AD · 52106160AE · 52106160AF · TC5350 · TC6075 · CB81218PR · CB81218 · FA3332 · CMS251022 · MS251022 · 2606338 · 8CB25144
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a control arm for the 2000-2004 Dodge Dakota's front right upper position?
Yes. MOOG Chassis RK621756 is a front right upper control arm with ball joint for the 2000-2004 Dodge Dakota. The left side is a separate part.
Is this upper control arm for the 2000-2004 Dodge Dakota also right for the 2000-2003 Dodge Durango?
Yes. This front right upper arm fits the 2000-2003 Dodge Durango as well.
Does this control arm and ball joint assembly come with bushings and hardware?
Yes. This arm includes the bushings, ball joint, grease fitting and mounting hardware, and it is pre-greased. The listing is for one arm only.
What is the MOOG Chassis control arm made of?
MOOG Chassis RK621756 has a stamped steel control arm with rubber bushings. Its ball joint has a threaded stud and mounts with a bolt-in design.
Does the MOOG Chassis RK621756 replace number 5166384AA?
Yes. 5166384AA is on the interchange list for MOOG Chassis RK621756, along with other numbers printed at the bottom of the description.
No reviews yet — be the first to review this product.
Write a ReviewWARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.