MOOG Chassis Products K5162 front upper control arm bushing kit for the 1962-1970 Pontiac Bonneville and other vehicles gives the upper control arm a pivot point and absorbs road vibration.
- Elastomer compounds for durability and ride performance
- Built for quiet operation and resistance to wear, salt, road grime and oils
- Press-in mounting
- Design and development tested by MOOG engineers
Quick facts
- Part: MOOG Chassis Products K5162 control arm bushing kit
- Also called: suspension control arm bushing kit
- Fits: 1962-1970 Pontiac Bonneville and other vehicles
- Position: Front upper
- Material: Elastomer compounds
Worn control arm bushings can show up as a clunk over bumps, loose or wandering steering or uneven tire wear. Before you replace the bushings, rule out worn ball joints, loose fasteners and tired shocks or springs, since they can produce similar signs.
Fits
Besides the 1962-1970 Pontiac Bonneville, the kit fits the 1963-1970 Pontiac Catalina and the 1967-1970 Pontiac Executive. The design is engineered to match or exceed OE requirements. For a Pontiac not named here, find its year and model in the "Vehicles it fits" section. The 1962-1970 Pontiac Bonneville takes two; this listing is one kit, and the two are normally replaced together.
Specifications
Fit and size
- Position: Front upper
- Quantity per vehicle: 2
- Inside diameter: 0.690 in
- Outside diameter: 1.300 in
- Mounting type: Press in
Build and materials
- Material: Elastomer compounds
- Country of origin: India
In the box
One control arm bushing kit. Mounting hardware and a dust boot are not included, so plan on new hardware rather than reusing the old.
Interchange: A2-049 · 602.62045 · 532-163 · SB-2203 · 267-1203 · 560-1008
45G8008 · 46G8008A · TD4838W · TD4842W · DG5601008 · 2203B · 548845 · FB238 · MS50497 · KC1151 · 12203 · 5601008B · 80712203 · IB2203
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
Does the MOOG K5162 bushing kit fit a 1963-1970 Pontiac Catalina?
Yes. MOOG Chassis Products K5162 fits the 1963-1970 Pontiac Catalina in the front upper position, and that car takes two.
Do the K5162 bushings come with mounting hardware or dust boots?
No. MOOG Chassis Products K5162 is the bushing kit only; mounting hardware and a dust boot are not included.
Is this suspension control arm bushing kit pressed in or bolted?
It is a press-in design. The inside diameter is 0.690 in and the outside diameter is 1.300 in.
Are these front upper bushings built to resist road salt and oil?
Yes. The bushings use elastomer compounds optimized for quiet operation and resistance to wear, salt, road grime and oils.
What signs can mean front upper control arm bushings are worn?
A clunk over bumps, loose or wandering steering and uneven tire wear can come from worn bushings, though other suspension parts can cause them too. A shop can inspect the arm.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review