Take up the play in worn front upper control arm mounts with the Delphi Suspension Control Arm Bushing Kit TD4066W — a front upper bushing kit that locates the control arm and helps isolate road vibration on a wide range of classic GM cars. It's a direct-fit replacement for applications including the 1966-1972 Buick Skylark, 1964-1972 Chevrolet Chevelle, 1963-1982 Chevrolet Corvette, 1967-1969 Chevrolet Camaro, 1965-1972 Oldsmobile Cutlass, and 1964-1972 Pontiac GTO; see the Buyer's Guide tab for the full list of 44 applications.
Delphi tests to the extreme for OE-level performance: parts withstand temperatures below -40°C and over 120°C and endure 720 hours of salt spray, with extensive dimensional and material analysis for OE-to-aftermarket compatibility. Signs the original bushings may need replacing include clunking on acceleration or over bumps, imprecise steering, and cracked or deteriorated rubber.
Interchange: 602.62173
60262173 · 3711826 · BB5196 · K5196 · GK5196 · MK5196 · JBU902
This part cross-references / interchanges with the following part numbers:
Where does this kit install?
It's a front upper suspension control arm bushing kit — the bushings mount where the front upper control arm attaches to the vehicle, locating the arm and helping isolate vibration.
Which vehicles does the TD4066W fit?
It fits 44 classic GM applications, including the 1966-1972 Buick Skylark, 1964-1972 Chevrolet Chevelle, 1963-1982 Corvette, 1965-1972 Oldsmobile Cutlass, and 1964-1972 Pontiac GTO. See the Buyer's Guide tab for the complete list.
What part numbers does this bushing kit replace?
It cross-references 602.62173 (60262173), 3711826, BB5196, K5196, GK5196, MK5196, and JBU902. Match your original number to confirm the correct kit.
How do I know if my control arm bushings are worn?
Common signs include clunking on acceleration or over bumps, vague or imprecise steering, and cracked or deteriorated rubber. Diagnose the cause before ordering, as other suspension parts can produce similar symptoms.
Are these bushings built to OE standards?
Yes. Delphi designs the bushings to OE standards and tests to the extreme — withstanding temperatures below -40°C and over 120°C plus 720 hours of salt spray, with dimensional and material analysis for OE compatibility.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
