MOOG Chassis K200787 front lower control arm bushing for the 2000-2013 Chevrolet Impala and other vehicles sits at the control arm pivot and cushions its movement. Also called a suspension control arm bushing, this vertical bushing goes in the front lower forward position.
- Part of the MOOG Problem Solver line of vertical control arm bushings
- Ball and socket design allows smooth rotational movement
- Design aligns the bushing sleeve so the bolt can be inserted, saving installation time
- Permanently lubricated and sealed, with a MOOG boot that helps prevent contamination
- Polymer and steel compounds for durability and ride performance
- Tested by MOOG engineers throughout design and development
Quick facts
- Part: MOOG Chassis K200787 control arm bushing
- Also called: suspension control arm bushing
- Fits: 2000-2013 Chevrolet Impala and other vehicles
- Position: Front lower forward
- Material: Polymer and steel compounds
- Condition: New
A worn control arm bushing can show up as a clunk over bumps, wandering steering or uneven tire wear. Loose ball joints, worn sway bar links or tired struts can be behind those symptoms too, so work out which part is at fault before you buy.
Fits
Fitment includes the 2000-2013 Chevrolet Impala, the 2005-2009 Buick LaCrosse and the 2005-2008 Chevrolet Uplander. Each takes two bushings, so plan on a pair. For any other model, open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Position: Front lower forward
- Quantity per vehicle: 2
- Inside diameter: 0.563 in
- Outside diameter: 2.210 in
Build and materials
- Material: Polymer and steel compounds
- Lubrication: Permanently lubricated and sealed
- Condition: New
- Country of origin: Mexico
Interchange: 531-226
10255029 · BB90095 · MK6712 · 2673664
This part cross-references / interchanges with the following part numbers:
531-226, 10255029, BB90095, MK6712, 2673664
Frequently Asked Questions
Is MOOG K200787 an Impala control arm bushing for the 2000-2013 model years?
Yes. MOOG Chassis K200787 fits the 2000-2013 Chevrolet Impala in the front lower forward position. For another car, open the "Vehicles it fits" section to check your model and engine.
What size is the MOOG K200787 bushing?
The MOOG Chassis K200787 control arm bushing has an inside diameter of 0.563 in and an outside diameter of 2.210 in.
Does the MOOG K200787 bushing need regular greasing?
No. The bushing assembly is permanently lubricated and sealed, and its MOOG boot helps prevent contamination.
How do I tell if my front lower forward control arm bushing is worn?
A clunk over bumps, wandering steering or uneven tire wear can go with a worn bushing. A shop can inspect the pivot for cracks, tears or play and test for other causes.
Why does the MOOG K200787 use a ball and socket design?
The ball and socket design allows smooth rotational movement. It also aligns the bushing sleeve so the bolt can be inserted, which saves time during installation.
