Delphi TC1950 rear right upper control arm for the 2007-2012 Mercedes-Benz SL550 and other vehicles connects the rear wheel assembly to the chassis. This Delphi control arm goes in the rear right upper rearward position and lets the wheel move with the suspension.
- Control arm is exposed to temperatures below -40 degrees C and over 120 degrees C and to 720 hours of salt spray
- 100% crack detection and ultrasonic flaw detection on every control arm
- Robot welding for consistent performance and quality
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Anti-corrosion protection applied to each control arm
Quick facts
- Part: Delphi TC1950 control arm
- Also called: suspension control arm
- Fits: 2007-2012 Mercedes-Benz SL550 and other vehicles
- Position: Rear right upper rearward
- Condition: New
A worn suspension control arm can show up as a clunk over bumps, uneven tire wear or loose handling at the rear. Those signs alone do not prove the arm is the problem; a tired shock absorber can cause a similar clunk. This listing is one arm for the rear right; the rear left is a separate part, and both sides are normally replaced together.
Fits
Listed for a wide range of Mercedes-Benz models, led by the 2007-2012 Mercedes-Benz SL550, the 2007-2011 Mercedes-Benz CLS550 and the 2003-2009 Mercedes-Benz E320. If your car is not one of these, open the "Vehicles it fits" section and check your exact model, year and engine.
Specifications
Fit and size
- Position: rear right upper rearward
- Quantity per vehicle: 1
- Sold individually: 1 per listing
Build and materials
- Condition: New
- Finish: anti-corrosion protection on each part
In the box
One control arm. The rear right position takes one.
Interchange: 101-6442 · 101-6705 · 102-6442 · 102-6705
230 350 28 06 · A230 350 2806 · CA28568 · CA28578 · CK620100 · RK620100 · CMS101103 · GS101103 · MS101103 · JTC1460
This part cross-references / interchanges with the following part numbers:
101-6442, 101-6705, 102-6442, 102-6705, CA28568, CA28578, CK620100, RK620100, 230 350 28 06, A230 350 2806, CMS101103, GS101103, MS101103, JTC1460
Frequently Asked Questions
Is the Delphi TC1950 the Mercedes E320 control arm for a 2003-2009 Mercedes-Benz E320?
Yes. Delphi TC1950 is listed for the 2003-2009 Mercedes-Benz E320 and goes in the rear right upper rearward position.
Is the Delphi TC1950 for the rear right or rear left of a 2007-2012 Mercedes-Benz SL550?
Delphi TC1950 is the rear right upper rearward control arm. The rear left side is a separate part.
How is this control arm tested for heat, cold and corrosion?
Delphi parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Anti-corrosion protection is applied to each part.
What is special about the ball studs on this control arm?
Delphi machines the ball studs to micron tolerances for durability and smooth joint operation.
Does the Delphi TC1950 replace number A230 350 2806?
Yes. A230 350 2806 is on the interchange list for Delphi TC1950, along with 230 350 28 06 and other cross-reference numbers.
