Delphi TC2733 front right lower control arm for the 2011-2018 Volkswagen Jetta connects the wheel to the body and lets the suspension move.
- Withstands temperatures below -40 degrees C and over 120 degrees C, and 720 hours of salt spray
- Every Delphi control arm gets 100% crack detection and ultrasonic flaw detection
- Robot welding for consistent performance and quality
- Ball studs machined to micron tolerances for smooth joint operation
- Anti-corrosion protection applied to the arm
Quick facts
- Part: Delphi TC2733 control arm
- Also called: suspension control arm
- Fits: 2011-2018 Volkswagen Jetta
- Position: Front right lower
- Condition: New
A worn control arm can show up as a clunk over bumps, loose or wandering steering, or uneven tire wear. Worn sway bar links, tie rod ends or a wheel bearing can be behind these signs too, so find the cause before buying.
Fits
This control arm is a direct-fit replacement for the 2011-2018 Volkswagen Jetta.
Specifications
Fit and size
- Position: Front right lower
- Quantity for the front right: 1
Build and materials
- Condition: New
- Construction: robot welded
- Ball studs: machined to micron tolerances
- Corrosion protection: anti-corrosion protection applied
In the box
One front right lower control arm. The front right takes one, so the front left is a separate part ordered on its own, and the two sides are normally replaced together.
Interchange: 102-7911 · 622.33856 · 522-994 · 526-408 · 5C0 407 152 A · 5C0 407 152 B · 5C0 407 152 D
CB43324 · CB43324PR · CK621950 · K621950 · RK621950 · CMS70173 · GS70173 · JTC2815
This part cross-references / interchanges with the following part numbers:
102-7911, 622.33856, 522-994, 526-408, CB43324, CB43324PR, CK621950, K621950, RK621950, CMS70173, GS70173, JTC2815, 5C0 407 152 A, 5C0 407 152 B, 5C0 407 152 D
Frequently Asked Questions
Is Delphi TC2733 a VW Jetta control arm for the 2011-2018 model years?
Yes. Delphi TC2733 is a front right lower control arm for the 2011-2018 Volkswagen Jetta. The left side is a separate part.
What can a worn front lower suspension control arm feel like?
A clunk over bumps, loose or wandering steering, or uneven tire wear can be signs of a worn arm. A shop can inspect the arm and its joint.
How are the ball studs on the Delphi TC2733 made?
Delphi machines the ball studs on the TC2733 to micron tolerances for smooth joint operation. The arm itself is robot welded for consistent quality.
Does this control arm get any flaw testing?
Yes. Every Delphi control arm goes through 100% crack detection and ultrasonic flaw detection.
What temperatures and conditions is this control arm tested for?
Delphi parts withstand temperatures below -40 degrees C and over 120 degrees C. They are also exposed to 720 hours of salt spray.
