Mevotech Supreme Suspension Control Arm P/N:CMS101680
Mevotech Supreme CMS401104 rear right lower control arm for the 2009-2012 Ford Fusion and other vehicles connects the rear right wheel to the body and guides its movement. This suspension control arm sits in the lower rear right position.
A worn arm or worn bushings can show up as a clunk over bumps, uneven tire wear or a car that wanders; other suspension parts can produce these too. With the engine off, look at the rubber for cracks and the arm for bends or rust before you replace it. The rear arms are normally replaced as a pair; this listing is one arm for the rear right, and the rear left is ordered separately. A 2009-2012 Ford Fusion takes one arm at this position.
It is a direct-fit lower control arm for the 2009-2012 Ford Fusion, the 2009-2012 Lincoln MKZ and the 2009-2011 Mercury Milan, and is built to meet or exceed OE specifications.
Fit and size
Build and materials
One rear right lower control arm with its rubber bushings.
Interchange: 524-250 · 526-004
19327340 · PGS401104 · TC7382 · CA85614 · CA85614PR · CA10477 · 9E5Z5A649A · 9E5Z5A649C · RK643071 · C6GS401104 · GS401104 · 2607393 · 1401104 · 30034374 · 8CB40216 · CP5115
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a control arm for the 2009-2012 Ford Fusion?
Yes. Mevotech Supreme CMS401104 is the rear right lower control arm for the 2009-2012 Ford Fusion, and it also fits the 2009-2012 Lincoln MKZ.
Is CMS401104 the rear right lower control arm for the 2009-2011 Mercury Milan?
Yes. Mevotech Supreme CMS401104 fits the 2009-2011 Mercury Milan as the rear right lower control arm.
Are the bushings included with this Mevotech Supreme control arm?
Yes. The arm comes with its bushings. The bushing material is rubber and the control arm itself is steel.
How can I tell if the bushings on a rear lower control arm are worn?
With the car parked and the engine off, look for cracked, split or torn rubber and a bent or rusted arm. A clunk over bumps or uneven tire wear can also be signs of wear.
Does this steel control arm have a rust-resistant finish?
Yes. This control arm is stamped steel with a protective surface treatment that helps prevent rust build-up. It measures 20.2 inches long.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.