The Delphi TC3802 front sway bar link for the 2016-2025 Honda Civic and other vehicles connects the sway bar to the suspension so the bar can resist body roll. It draws on the same OE expertise as Delphi's safety technology, which is fitted to millions of vehicles worldwide.
- Tested to withstand temperatures below -40 degrees C and over 120 degrees C, and exposed to 720 hours of salt spray.
- Dimensional and material analysis aims for close compatibility between the OE part and this link.
- Made with ultrasonic molding to help prevent future weld breakage.
- Fatigue tested to avoid failure.
- Machined to micron tolerances for durability and smooth joint operation.
- Anti-corrosion protection is applied to each part to help prevent corrosion and improve its appearance.
A clunk or rattle from the front over bumps, more body lean in turns, or play at a link joint can mean a link is worn. Before you replace it, rule out worn control arm bushings, ball joints and strut mounts, since they can knock too. This listing is a single link, and both front links are normally replaced together.
It is listed for a wide range of Honda and Acura models, including the 2018-2025 Honda Accord, where it is the front stabilizer link, and the 2020-2025 Honda CR-V. If your model isn't named here, open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Position: Front
- Quantity per vehicle: 2
- Pieces in this listing: 1
Build and materials
- Manufacturing: ultrasonic molding
- Machining: micron tolerances
- Corrosion protection: anti-corrosion protection on each part
- Salt spray exposure: 720 hours
- Temperature testing: below -40 degrees C and over 120 degrees C
In the box: one front sway bar link. The vehicles it fits take two, one on each side.
Interchange: 101-8507 · 51320-TBA-A01 · 51320-TBA-A02 · 51320-TVA-A01
KSLF4372 · KSLF4577 · K750865 · MS608138 · JBU2424 · JTS1771
This part cross-references / interchanges with the following part numbers:
101-8507, 51320-TBA-A01, 51320-TBA-A02, 51320-TVA-A01, KSLF4372, KSLF4577, K750865, MS608138, JBU2424, JTS1771
Frequently Asked Questions
Is the Delphi TC3802 the front stabilizer bar link for a 2016-2025 Honda Civic?
Yes. The Delphi TC3802 is a direct-fit front sway bar link for the 2016-2025 Honda Civic.
Does the Delphi TC3802 include the stabilizer bar for a 2018-2025 Honda Accord?
No. This listing is one Delphi TC3802 front sway bar link for the 2018-2025 Honda Accord; the stabilizer bar itself is sold separately.
What heat, cold and salt testing does the TC3802 link go through?
This front sway bar link is tested to withstand temperatures below -40 degrees C and over 120 degrees C, and it is exposed to 720 hours of salt spray.
What does a worn front sway bar link sound or feel like?
A worn front sway bar link can clunk or rattle over bumps, let the body lean more in turns, or show play at its joints.
Why is ultrasonic molding used on this Delphi link?
Ultrasonic molding helps prevent future weld breakage on this front sway bar link, and the link is also fatigue tested to avoid failure.
