Monroe 172492 front left strut assembly for the 2007-2012 Acura RDX is a Monroe Quick-Strut with the spring and mount already assembled. It is fit checked and ride tested for this vehicle.
- Strut, coil spring and upper strut mount come preassembled in one unit
- Replacement needs no spring compressor, because the unit arrives fully assembled
- Application-specific coil spring calibrated to restore ride height and support the vehicle's weight
- Reduces body sway, vibration and road harshness before it reaches the passenger cabin
- Upper strut mount helps keep steering precise and limits noise, vibration, harshness and memory steer
- Protective coating resists rust and corrosion, and the part is salt spray tested
Quick facts
- Part: Monroe 172492 strut assembly
- Also called: complete strut and coil spring assembly
- Fits: 2007-2012 Acura RDX
- Position: Front left
- Condition: New
Front struts are normally replaced in pairs. This listing is one strut for the front left, the front right is a separate part, and the 2007-2012 Acura RDX takes one on each side. Nose dive when braking or a clunk over bumps can mean a worn strut. With the engine off, look for oil on the strut body or a cracked coil spring, and find the cause before replacing it.
Fits
This Monroe quick strut assembly is a direct-fit replacement for the front left of the 2007-2012 Acura RDX.
Specifications
Fit and size
- Position: Front left
- Quantity per application: 1
- Compressed length: 12.23 in (310.6 mm)
- Extended length: 20.53 in (521.5 mm)
- Travel length: 8.3 in
- Body length: 15.462 in
Build and materials
- Type: gas charged, passive suspension
- Condition: New
- Warranty: Monroe Limited Lifetime Warranty
- Country of origin: China
In the box
One strut assembly with its coil spring, strut mount, coil spring insulator, strut mount insulator and mounting hardware.
Interchange: LS5390621L · 33AC1106
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
LS5390621L, 33AC1106, 172492
Frequently Asked Questions
Is this Monroe strut assembly right for the front left of the 2007-2012 Acura RDX?
Yes. Monroe 172492 is the front left strut assembly for the 2007-2012 Acura RDX. The front right side takes a separate part.
Does the Monroe 172492 complete strut and coil spring assembly include the upper mount?
Yes. Monroe 172492 comes with the coil spring, strut mount, both insulators and mounting hardware. The mount, spring and strut are preassembled.
What are the lengths of this Monroe complete strut assembly?
Compressed length is 12.23 in (310.6 mm) and extended length is 20.53 in (521.5 mm), with 8.3 in of travel.
Do I need a spring compressor to install this Monroe Quick-Strut strut and coil spring assembly?
No. This strut assembly arrives fully assembled, so no spring compressor is needed to swap it in.
Is the Monroe 172492 strut covered by a warranty?
Yes. Monroe backs the 172492 strut assembly with its Limited Lifetime Warranty.
