Monroe 372729 front right strut assembly for the 2013 Ford Police Interceptor Utility is a Monroe quick strut that supports the front right corner and dampens road motion. Also called a complete strut and coil spring assembly, it arrives preassembled with the spring and upper mount.
- Monroe Quick-Strut line, fully assembled so no spring compressor is needed
- Application-specific coil spring engineered to restore ride height and support the vehicle's weight
- Gas-charged strut that reduces body sway, vibration and road harshness
- Upper strut mount helps keep steering precise and limits noise, vibration, harshness and memory steer
- Protective coating resists rust and corrosion, and salt spray testing backs it up
Quick facts
- Part: Monroe 372729 strut assembly
- Also called: complete strut and coil spring assembly
- Fits: 2013 Ford Police Interceptor Utility
- Position: Front right
- Condition: New
A worn strut can show up as a bouncy ride, a knock over bumps or extra body sway. These signs alone do not prove the strut is the problem; a worn tire or a loose sway bar link can feel similar.
Fits
This Monroe quick strut assembly is a direct-fit replacement for the 2013 Ford Police Interceptor Utility, which takes one on the front right. This listing is one unit; the front left is a separate part, and both sides are normally replaced together.
Specifications
Fit and size
- Position: Front right
- Quantity: 1 per listing
- Body length: 16.17 in
- Compressed length: 11.8 in (299.7 mm)
- Extended length: 17.45 in (443.2 mm)
- Travel length: 5.65 in
Build and materials
- Type: gas-charged strut, passive suspension
- Adjustable compression and ride height: no
- Condition: New
- Assembled in Paragould, Arkansas
- Warranty: Monroe Limited Lifetime Warranty
In the box
One front right strut assembly with the coil spring, upper strut mount, coil spring insulators, strut mount insulators and mounting hardware.
Interchange: 2701594463 · 2701594496 · 18815021 · 1333462L · 2333449R · 92141933
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
Is this Monroe strut assembly for the front right of the 2013 Ford Police Interceptor Utility?
Yes. Monroe 372729 is a front right strut assembly for the 2013 Ford Police Interceptor Utility. The front left side is a separate part.
Does the Monroe complete strut assembly come with the spring and upper mount?
Yes. Monroe 372729 includes the coil spring, upper strut mount, spring and mount insulators and mounting hardware, preassembled as one unit.
What are the compressed and extended lengths of this strut?
The compressed length is 11.8 in (299.7 mm) and the extended length is 17.45 in (443.2 mm). Travel is 5.65 in and the body length is 16.17 in.
What should I look for on a worn front strut assembly?
With the vehicle parked and cool, look for oil film on the strut body, a cracked or sagging spring and visible wear at the upper mount. A shop can test the rest.
Does the Monroe quick strut and coil spring assembly need a spring compressor?
No. The strut, spring and upper mount arrive fully assembled in one unit, so installing this Quick-Strut needs no spring compressor.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review