Monroe Shocks & Struts 272897 front right strut assembly for the 2013 Nissan Rogue and other vehicles replaces the strut, coil spring and upper mount as one unit. This complete strut and coil spring assembly has a vehicle-specific design and is fit checked and ride tested.
- Quick-Strut assembly with the strut, coil spring and upper strut mount preassembled
- Application-specific coil spring engineered to restore ride height and support the vehicle's weight
- Upper strut mount helps keep steering precise and limits noise, vibration, harshness and memory steer
- Reduces body sway, vibration and road harshness before it reaches the passenger cabin
- Protective coating resists rust and corrosion, and salt spray testing checks it
Quick facts
- Part: Monroe Shocks & Struts 272897 strut assembly
- Also called: complete strut and coil spring assembly
- Fits: 2013 Nissan Rogue and other vehicles
- Position: Front right
- Condition: New
A worn strut can show up as oily fluid on the strut body, extra body sway or a knock over bumps, though other suspension parts can also knock. With the engine off, look the strut over for fluid and the spring for cracks or breaks, and find the cause before you replace it.
Fits
It fits the 2013 Nissan Rogue and the 2014-2015 Nissan Rogue Select, and each takes one on the front right. This listing is one strut assembly; the front left is a separate part ordered on its own, and the two sides are normally replaced together.
Specifications
Fit and size
- Position: front right
- Quantity per vehicle: 1
- Compressed length: 16.43 in (417.3 mm)
- Extended length: 21.91 in (556.5 mm)
- Travel length: 5.48 in
- Body length: 15.89 in
Build and materials
- Gas charged: yes
- Suspension type: passive, with no adjustable compression or ride height
- Coil spring, strut mount and insulators: included
- Condition: new
- Warranty: Monroe Limited Lifetime Warranty and Feel the Difference Guarantee
- Country of origin: China
In the box
One strut assembly with the coil spring and upper strut mount preassembled, plus the coil spring and strut mount insulators. Mounting hardware is included.
Installation notes
- No spring compressor is needed because the unit comes fully assembled.
Interchange: LS5495541R · 34NS1165
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
LS5495541R, 34NS1165, 272897
Frequently Asked Questions
Does the Monroe 272897 strut assembly fit the 2014-2015 Nissan Rogue Select?
Yes. Monroe Shocks & Struts 272897 fits the 2014-2015 Nissan Rogue Select and the 2013 Nissan Rogue, and it is the front right strut assembly.
Does the Monroe 272897 strut assembly come with the coil spring and upper mount?
Yes. Monroe Shocks & Struts 272897 comes with the coil spring and upper strut mount preassembled, plus the coil spring and strut mount insulators and mounting hardware.
How long is the Monroe Quick-Strut 272897 when extended and compressed?
Extended length is 21.91 in (556.5 mm) and compressed length is 16.43 in (417.3 mm), which gives 5.48 in of travel.
Is this Monroe Quick-Strut front right strut assembly gas charged?
Yes. This strut assembly is gas charged, and its compression and ride height are not adjustable.
Do I need a spring compressor to install this Quick-Strut assembly?
No. This strut assembly arrives fully assembled, so no spring compressor is needed to swap it in.
