Monroe Shocks & Struts 372216 rear left strut assembly for the 2006-2007 Toyota Highlander dampens wheel movement and supports the vehicle's weight with its coil spring. Also called a complete strut and coil spring assembly, it is a vehicle-specific unit that is fit checked and ride tested.
- Quick-Strut design with strut, coil spring and upper mount preassembled; no spring compressor needed
- Application-specific coil spring engineered to restore ride height
- Reduces body sway, vibration and road harshness before it reaches the cabin
- Upper strut mount helps keep steering smooth and precise, and limits noise, vibration, harshness and memory steer
- Protective coating resists rust and corrosion, and the part is salt spray tested
Quick facts
- Part: Monroe Shocks & Struts 372216 strut assembly
- Also called: complete strut and coil spring assembly
- Fits: 2006-2007 Toyota Highlander
- Position: Rear left
- Condition: New
A worn rear strut can show up as a bouncy or swaying ride, fluid on the strut body or a clunk over bumps. Before you replace this assembly, rule out other parts in the rear suspension that can produce similar noises and ride changes, such as a worn sway bar link or bushing.
Fits
This listing is one rear left assembly for the 2006-2007 Toyota Highlander, which takes one per side on that axle. The rear right is a separate part, and the two on that axle are normally replaced at the same time.
Specifications
Fit and size
- Position: Rear left
- Quantity per vehicle: 1
- Body length: 14.31 in
- Compressed length: 15.41 in (391.4 mm)
- Extended length: 22.925 in (582.3 mm)
Build and materials
- Type: Gas-charged, passive suspension
- Adjustable compression: No
- Adjustable ride height: No
- Condition: New
- Warranty: Monroe Limited Lifetime Warranty
- Country of origin: China
In the box
One strut assembly with the coil spring, upper strut mount, coil spring insulator, strut mount insulator and mounting hardware.
Interchange: LS5494122L
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
Is the Monroe 372216 a rear left strut assembly for the 2006-2007 Toyota Highlander?
Yes. Monroe Shocks & Struts 372216 is the rear left strut assembly for the 2006-2007 Toyota Highlander. The rear right side is a separate part.
Does the Monroe 372216 come with the coil spring and upper mount?
Yes. Monroe 372216 includes the coil spring, upper strut mount, coil spring insulator, strut mount insulator and mounting hardware in one preassembled unit.
What are the compressed and extended lengths of this rear strut assembly?
The compressed length is 15.41 in (391.4 mm) and the extended length is 22.925 in (582.3 mm). The body length is 14.31 in.
How do I check a rear left strut assembly for wear?
Fluid running down the strut body is a sign of wear you can see with the vehicle parked and the engine off. While driving, a bouncy ride or a clunk over bumps is also a sign of wear.
Do I need a spring compressor to install this Monroe Quick-Strut?
No. The Monroe Quick-Strut 372216 arrives as a fully assembled unit, so no spring compressor is needed.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review