DAYCO PRODUCTS LLC 89009 right accessory drive belt tensioner pulley for the 2012-2015 Honda Civic 1.8L and other vehicles guides the serpentine belt through the accessory drive and holds it in line.
- Light-duty idler/tensioner pulley
- Polymer pulley with 6 grooves for a serpentine belt up to 6 ribs wide
- One bearing, 17 mm inner diameter and 12 mm wide
- 76 mm outside diameter, 28.7 mm wide
A chirp or squeal from the belt area, a wobbling pulley or a belt that wears unevenly can mean the pulley bearing is wearing out, but a worn belt or another accessory can make similar noise. With the engine off and cool, look the belt over for cracks and glazing and turn the pulley by hand for roughness or play before you replace anything.
This pulley also fits the 1999-2013 Chevrolet Silverado 1500 4.8L / 5.3L / 6.0L / 6.2L and the 2011-2013 Ram 1500 4.7L, and each of them takes a single pulley. If your car is not named here, look up your year and engine in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: right
- Quantity per vehicle: 1
- Outside diameter: 76 mm
- Width: 28.7 mm
- Bearing inner diameter: 17 mm
- Bearing width: 12 mm
- Grooves: 6
- Maximum belt width: 6 rib
Build and materials
- Duty: light
- Material: Polymer
- Belt type: serpentine
- Surface: grooved
- Number of bearings: 1
- Country of origin: United States
Interchange: 419-603
38009 · 580255 · 49003 · A5486 · 45971 · 57102 · 5971 · 231086 · 131086 · 900027A · YS169 · 209751 · 900027
This part cross-references / interchanges with the following part numbers:
38009, 580255, 49003, 419-603, A5486, 45971, 57102, 5971, 231086, 131086, 900027A, YS169, 209751, 900027
Frequently Asked Questions
Does the DAYCO 89009 pulley fit a 2012-2015 Honda Civic 1.8L?
Yes, DAYCO 89009 fits the 2012-2015 Honda Civic 1.8L, and that engine takes one pulley.
Will this pulley fit a 2011-2013 Ram 1500 4.7L or a 1999-2013 Chevrolet Silverado 1500 5.3L?
Yes, DAYCO 89009 fits the 2011-2013 Ram 1500 4.7L and the 1999-2013 Chevrolet Silverado 1500 4.8L / 5.3L / 6.0L / 6.2L. For other cars, check your year and engine in the "Vehicles it fits" section.
What are the dimensions of the DAYCO 89009 pulley?
It has a 76 mm outside diameter, is 28.7 mm wide and has 6 grooves. The bearing is 17 mm inner diameter and 12 mm wide.
What is the DAYCO 89009 pulley made of, and which belt does it run?
This pulley is made of polymer with one bearing, and it runs a serpentine belt up to 6 ribs wide. Its country of origin is the United States.
Does DAYCO 89009 replace 419-603?
Yes, DAYCO 89009 is listed as a replacement for 419-603. Other numbers it replaces include 38009, 580255 and 49003.
