TERREPOWER 712-0157 power steering pump for the 2008-2010 Ford F-250 Super Duty and other vehicles supplies hydraulic pressure to the power steering system. This remanufactured pump is made for a remote reservoir setup.
- Cast iron housing
- Threaded M16X1.50 outlet with a 16 mm outlet diameter
- Pipe-type inlet, 0.633 in in diameter
- Press-on pulley attachment and four mounting holes
- Installation kit included
Quick facts
- Part: TERREPOWER 712-0157 power steering pump
- Fits: 2008-2010 Ford F-250 Super Duty and other vehicles
- Material: Cast iron housing
- Condition: Remanufactured
A whining or groaning noise when turning, steering that feels heavy, or fluid around the pump can mean the pump is wearing out. These signs alone do not prove the pump is the problem; a leaking hose is another common cause.
Fits
The vehicles it fits include the 2008-2010 Ford F-250 Super Duty, the 2008-2010 Ford F-350 Super Duty and the 2008-2010 Ford F-450 Super Duty. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Quantity per vehicle: 1
- Mounting holes: 4
- Outlet thread size: M16X1.50
- Outlet diameter: 16 mm
- Inlet diameter: 0.633 in
- Inlet attachment: pipe
- Outlet attachment: threaded
- Pulley attachment: press-on
Build and materials
- Type: hydraulic power steering pump
- Housing material: cast iron
- Remote reservoir: yes
- Condition: remanufactured
- Country of origin: Mexico
In the box
One remanufactured power steering pump and an installation kit. This listing holds one pump, and each vehicle takes one. The reservoir, reservoir cap, pulley, filter and sensor are not included.
Frequently Asked Questions
Is the TERREPOWER 712-0157 power steering pump right for a 2008-2010 Ford F-350 Super Duty?
Yes, TERREPOWER 712-0157 fits the 2008-2010 Ford F-350 Super Duty. Open the "Vehicles it fits" section to check other models and engines.
Does this remanufactured power steering pump come with a reservoir or pulley?
No. The TERREPOWER 712-0157 comes with an installation kit, but the reservoir, reservoir cap, pulley, filter and sensor are not included.
What size is the outlet thread on this power steering pump?
The outlet is threaded M16X1.50 with a 16 mm outlet diameter. The inlet is a pipe type, 0.633 in across.
How can I tell if this hydraulic power steering pump is wearing out?
A whine or groan when turning, heavy steering or fluid around the pump can point to wear. Pressure testing needs the engine running, so a shop should do it.
Is the housing on this TERREPOWER power steering pump cast iron?
Yes. The housing is cast iron, and this is a remanufactured hydraulic power steering pump.
