TERREPOWER 712-0177A1 power steering pump for the 2008-2010 Ford F-250 Super Duty and other vehicles is a remanufactured hydraulic pump that supplies fluid pressure for power-assisted steering.
- Cast iron housing
- Pulley included, press-on attachment, for a serpentine belt
- Installation kit included
- Remote reservoir design with four mounting holes and an M16X1.50 threaded outlet
Quick facts
- Part: TERREPOWER 712-0177A1 power steering pump
- Fits: 2008-2010 Ford F-250 Super Duty and other vehicles
- Material: Cast iron housing
- Condition: Remanufactured
A worn pump can show up as a whine or groan when turning, heavy steering or fluid at the pump. If the pump is the cause, this unit replaces it. Before replacing it, look over the hoses, fittings and belt for leaks or wear with the engine off and cool, since a problem there can produce similar signs. Fitment calls for one pump per vehicle.
Fits
It fits the 2008-2010 Ford F-250 Super Duty and the 2008-2010 Ford F-350 Super Duty.
Specifications
Fit and size
- Quantity per vehicle: 1
- Mounting holes: 4
- Outlet thread size: M16X1.50
- Outlet diameter: 16 mm
- Inlet diameter: 0.726 in
- Inlet attachment: pipe
- Outlet attachment: threaded
Build and materials
- Type: hydraulic, remote reservoir
- Housing material: cast iron
- Pulley: included, press-on attachment
- Pulley belt type: serpentine
- Condition: remanufactured
- Country of origin: Mexico
In the box
One power steering pump with its pulley and an installation kit. The reservoir, reservoir cap and filter are not included.
Frequently Asked Questions
Will the TERREPOWER 712-0177A1 power steering pump fit a 2008-2010 Ford F-350 Super Duty?
Yes, TERREPOWER 712-0177A1 fits the 2008-2010 Ford F-350 Super Duty and the 2008-2010 Ford F-250 Super Duty.
Does the TERREPOWER 712-0177A1 pump come with the reservoir?
No. The reservoir, reservoir cap and filter are not included with TERREPOWER 712-0177A1; the pump comes with its pulley and an installation kit.
What outlet thread does this power steering pump use?
The outlet is a threaded M16X1.50 connection with a 16 mm outlet diameter. The inlet is a pipe attachment with a 0.726 in diameter.
Can a whining noise when turning point to a failing power steering pump?
It can be one sign. A whine or groan while turning, heavy steering or fluid at the pump can mean the pump is wearing out, and a shop can test it.
Is the pulley on this remanufactured power steering pump for a serpentine belt?
Yes. The pulley is included with the pump, attaches by press-on and is for a serpentine belt.
