TERREPOWER 101-0129 rack and pinion for the 1998-2001 Ford Explorer and other vehicles turns steering wheel rotation into the side-to-side motion that moves the wheels. This remanufactured hydraulic unit is also called a rack and pinion assembly.
- Remanufactured hydraulic power steering rack and pinion
- Inner tie rods included with the rack
- 3.5 total turns lock to lock
- M16X1.50 thread on both the pressure port and the return port
- Designed for dependability and reliability throughout the service life of the vehicle
Quick facts
- Part: TERREPOWER 101-0129 rack and pinion
- Also called: rack and pinion assembly
- Fits: 1998-2001 Ford Explorer and other vehicles
- Condition: Remanufactured
Heavy or loose steering, a power steering fluid leak near the rack, or a whine or clunk when turning can mean the rack is worn. Before you replace it, rule out worn outer tie rod ends, a leaking hose or a weak pump, because a faulty rack is only one possible source.
Fits
This remanufactured rack and pinion is a direct-fit replacement for the 1998-2001 Ford Explorer, the 1998-2000 Ford Ranger and the 2001 Ford Explorer Sport Trac. If your car is not one of these, look it up in the "Vehicles it fits" section.
Specifications
Fit and size
- Quantity per vehicle: 1
- End to end length: 44.875 in (1139.83 mm)
- Distance between mounting holes: 11.25 in (285.75 mm), 2 mounting holes
- Input shaft length: 1.563 in (39.69 mm)
- Steering input shaft diameter: 0.75 in (19.05 mm)
- Total turns lock to lock: 3.5
- Pressure port thread size: M16X1.50
- Return port thread size: M16X1.50
Build and materials
- Type: Hydraulic
- Condition: Remanufactured
- Country of origin: Mexico
In the box
One rack and pinion with its inner tie rods; the vehicle takes one. Outer tie rods and bushings are not included.
Interchange: F87Z-3504-KC · F87Z-3504-KCRM
This part cross-references / interchanges with the following part numbers:
F87Z-3504-KC, F87Z-3504-KCRM
Frequently Asked Questions
Is this the rack and pinion for the 1998-2001 Ford Explorer?
Yes. TERREPOWER 101-0129 fits the 1998-2001 Ford Explorer. Owners of other models can find their car in the "Vehicles it fits" section.
Can this rack and pinion go on a 1998-2000 Ford Ranger?
Yes. It is listed for the 1998-2000 Ford Ranger, and that truck takes one.
Which tie rods come with the TERREPOWER 101-0129 rack and pinion?
The inner tie rods are included with TERREPOWER 101-0129. The outer tie rods and bushings are not included.
What thread size do the ports on this rack and pinion use?
The pressure port and the return port are both M16X1.50. The unit is hydraulic, with 3.5 total turns lock to lock.
Does F87Z-3504-KC cross to this rack and pinion?
Yes, F87Z-3504-KC is listed as an interchange number for this rack and pinion, along with F87Z-3504-KCRM.
