TERREPOWER 101-0133 rack and pinion for the 1999-2004 Ford Mustang turns steering wheel input into side-to-side motion at the wheels. Also called a rack and pinion assembly, this remanufactured unit is the hydraulic power steering type.
- Remanufactured hydraulic power steering rack and pinion unit
- Inner tie rods and bushings included
- 2.50 total turns lock to lock
- Pressure port thread 9/16X18 and return port thread 5/8X18
Quick facts
- Part: TERREPOWER 101-0133 rack and pinion
- Also called: rack and pinion assembly
- Fits: 1999-2004 Ford Mustang
- Condition: Remanufactured
A worn rack can show up as fluid around the boots or ends, looseness in the steering or a whine when you turn. These signs alone do not prove the rack is the problem, since a worn tie rod end can give similar symptoms.
Fits
This rack and pinion is a direct-fit replacement for the 1999-2004 Ford Mustang.
Specifications
Fit and size
- Quantity per vehicle: 1
- Total turns lock to lock: 2.50
- Distance between mounting holes: 15.5 in (393.7 mm), 2 mounting holes
- End to end length: 48.625 in (1235.08 mm)
- Input shaft diameter: 0.75 in (19.05 mm)
- Input shaft length: 2.25 in (57.15 mm)
- Pressure port thread size: 9/16X18
- Return port thread size: 5/8X18
Build and materials
- Type: Hydraulic
- Condition: Remanufactured
- Country of origin: Mexico
In the box
One remanufactured rack and pinion with its bushings and inner tie rods. Outer tie rods are not included. This listing holds one rack and pinion, and the 1999-2004 Ford Mustang takes one.
Interchange: 2R3Z-3504-BA · XR3Z-3504-BB · XR3Z-3504-BC · XR3Z-3504-BCRM
This part cross-references / interchanges with the following part numbers:
2R3Z-3504-BA, XR3Z-3504-BB, XR3Z-3504-BC, XR3Z-3504-BCRM
Frequently Asked Questions
Is the TERREPOWER 101-0133 rack and pinion right for the 1999-2004 Ford Mustang?
Yes. TERREPOWER 101-0133 is listed for the 1999-2004 Ford Mustang, and the years are the only fit detail the listing gives.
Do the tie rods come with this TERREPOWER rack and pinion?
The inner tie rods and bushings are included. The outer tie rods are not included, so they are ordered separately.
What thread sizes are the ports on the 101-0133 power steering rack?
TERREPOWER 101-0133 has a 9/16X18 pressure port thread and a 5/8X18 return port thread.
How can I tell if a power steering rack is leaking or worn?
With the engine off, look for fluid around the boots and ends. While driving, you may notice looseness in the steering or a whine when turning.
Does the 101-0133 replace number XR3Z-3504-BC?
Yes. TERREPOWER 101-0133 is listed as a replacement for XR3Z-3504-BC, along with 2R3Z-3504-BA, XR3Z-3504-BB and XR3Z-3504-BCRM.
