TERREPOWER 101-0137 rack and pinion for the 1999 Ford Taurus and other vehicles is a remanufactured power steering unit that steers the wheels from the steering wheel's input. This rack and pinion assembly is a hydraulic type, designed for dependable service over the life of the vehicle.
- Remanufactured hydraulic power steering rack and pinion unit
- Inner tie rods included
- M16X1.50 thread on both the pressure port and the return port
- 2.938 turns lock to lock
- Two mounting holes spaced 292.1 mm apart
Quick facts
- Part: TERREPOWER 101-0137 rack and pinion
- Also called: rack and pinion assembly
- Fits: 1999 Ford Taurus and other vehicles
- Condition: Remanufactured
Fluid weeping at the ends of the rack, looseness in the steering or a noise when you turn can mean the rack is worn. Before you replace it, rule out a leaking power steering hose, a weak pump or worn outer tie rod ends, since those can give similar steering complaints.
Fits
This rack and pinion fits the 1999 Ford Taurus and the 1999 Mercury Sable, and each takes one.
Specifications
Fit and size
- Quantity per vehicle: 1
- Mounting holes: 2, 292.1 mm (11.5 in) apart
- End to end length: 1241.3 mm (48.87 in)
- Input shaft length: 28.58 mm (1.125 in)
- Input shaft diameter: 19.05 mm (0.75 in)
- Total turns lock to lock: 2.938
- Pressure and return port thread size: M16X1.50
Build and materials
- Type: Hydraulic
- Condition: Remanufactured
- Inner tie rods: included
- Outer tie rods: not included
- Bushings: not included
- Country of origin: Mexico
In the box
One remanufactured rack and pinion. Outer tie rods and bushings are not included.
Interchange: XF1Z-3504-AB
Frequently Asked Questions
Is this the right 1999 Ford Taurus rack and pinion?
Yes. TERREPOWER 101-0137 fits the 1999 Ford Taurus and the 1999 Mercury Sable, and each takes one.
Are the outer tie rods included with TERREPOWER 101-0137?
No. TERREPOWER 101-0137 comes with the inner tie rods. The outer tie rods and the bushings are not included.
What thread size are the ports on this rack and pinion?
Both the pressure port and the return port on this rack and pinion are M16X1.50.
How can I tell if a rack and pinion is leaking or worn?
With the engine off, look for power steering fluid around the ends and ports of the rack. Looseness or a noise when turning can also point to wear, and a shop can test it further.
Does XF1Z-3504-AB match this rack and pinion?
Yes. XF1Z-3504-AB is listed as an interchange number for TERREPOWER 101-0137.
