TERREPOWER 211-0117 rack and pinion for the 2008-2014 Toyota Highlander converts steering wheel rotation into the side-to-side motion that turns the wheels. This remanufactured power steering unit, also called a rack and pinion assembly, is built for dependability throughout the vehicle's service life.
- Remanufactured power steering rack and pinion unit
- 36-spline steering input shaft, 17.3 mm in diameter
- 3.25 turns lock to lock
- Inner tie rods measure 258 mm long with an M16x1.50 size
- Bushings and an installation kit come with the unit
Quick facts
- Part: TERREPOWER 211-0117 rack and pinion
- Also called: rack and pinion assembly
- Fits: 2008-2014 Toyota Highlander
- Condition: Remanufactured
Heavy or loose steering, a clunk when turning or fluid seeping at the rack can mean the rack is worn, though a worn outer tie rod end or a tired power steering pump can be behind the same signs. Find the cause before you replace it.
Fits
This rack and pinion is a direct-fit replacement for the 2008-2014 Toyota Highlander, which takes one. The listing is a single unit.
Specifications
Fit and size
- Quantity per vehicle: 1
- End to end length: 1124 mm (44.2 in)
- Distance between mounting holes: 484.2 mm (19.063 in), 2 mounting holes
- Input shaft length: 73 mm (2.8 in)
- Input shaft diameter: 17.3 mm (0.68 in), 36 splines
- Total turns lock to lock: 3.25
- Inner tie rod length: 258 mm (10.1 in)
- Inner tie rod size: M16x1.50
Build and materials
- Condition: Remanufactured
- Inner tie rods: included
- Outer tie rods: not included
- Bushings: included
- Installation kit: included
- Country of origin: Mexico
In the box
One remanufactured rack and pinion with inner tie rods, bushings and an installation kit. Outer tie rods are not included.
Interchange: 45510-0E030 · 45510-48010
Frequently Asked Questions
Is the TERREPOWER 211-0117 rack and pinion right for the 2008-2014 Toyota Highlander?
Yes. TERREPOWER 211-0117 is a direct-fit replacement for the 2008-2014 Toyota Highlander, which takes one rack and pinion.
Does this remanufactured rack and pinion come with tie rods?
Inner tie rods are included, along with bushings and an installation kit. Outer tie rods are not included and are bought separately.
What size are the inner tie rods on this rack and pinion?
The inner tie rods are size M16x1.50 and 258 mm (10.1 in) long. The steering input shaft has 36 splines and a 17.3 mm diameter.
How can I tell if my rack and pinion is wearing out?
Heavy or loose steering, a clunk when turning, or fluid seeping around the rack can point to wear. A shop can test the power steering system to confirm.
Does 45510-48010 interchange with the TERREPOWER 211-0117 rack and pinion?
Yes. 45510-48010 is listed as an interchange number for TERREPOWER 211-0117, along with 45510-0E030.
