TERREPOWER 310-0147 rack and pinion for the 2002-2006 Nissan Altima converts steering wheel turns into the side-to-side motion that steers the wheels. This remanufactured rack and pinion assembly is a hydraulic power steering unit.
- Hydraulic type with 2.75 total turns lock to lock
- Pressure port thread M14X1.50 and return port thread M16X1.50
- Two mounting holes spaced 10.75 in (273.05 mm) apart
- Designed for dependability and reliability throughout the service life of the vehicle
Quick facts
- Part: TERREPOWER 310-0147 rack and pinion
- Also called: rack and pinion assembly
- Fits: 2002-2006 Nissan Altima
- Condition: Remanufactured
A worn rack can show up as fluid seepage at the rack ends, play in the steering wheel or noise when turning. A leaking hose, a tired power steering pump, worn outer tie rods or worn suspension bushings can be behind these signs too, so find the cause before you buy a replacement.
Fits
This rack and pinion is a direct-fit replacement for the 2002-2006 Nissan Altima, which takes one.
Specifications
Fit and size
- Quantity per vehicle: 1
- Total turns lock to lock: 2.75
- Mounting holes: 2, 10.75 in (273.05 mm) apart
- End-to-end length: 49.438 in (1255.71 mm)
- Input shaft length: 1.25 in (31.75 mm)
- Steering input shaft diameter: 0.75 in (19.05 mm)
- Pressure port thread: M14X1.50
- Return port thread: M16X1.50
Build and materials
- Type: Hydraulic
- Condition: Remanufactured
- Country of origin: Mexico
In the box
One rack and pinion with its inner tie rods and bushings. Outer tie rods are not included.
Interchange: 49001-8J000
19320892
Frequently Asked Questions
Is the TERREPOWER 310-0147 rack and pinion right for a 2002-2006 Nissan Altima?
Yes. TERREPOWER 310-0147 is a direct-fit rack and pinion for the 2002-2006 Nissan Altima, which takes one.
Does this rack and pinion come with tie rods?
It includes the inner tie rods and bushings. Outer tie rods are not included in this listing.
What thread sizes are the ports on TERREPOWER 310-0147?
TERREPOWER 310-0147 has an M14X1.50 pressure port and an M16X1.50 return port.
What can wet fluid or play in the steering say about a worn rack and pinion?
Fluid seepage at the rack ends, play in the steering wheel or noise when turning can point to a worn unit. Look for leaks only with the engine off and cool; a shop can test the rest.
Does 49001-8J000 cross-reference to this rack and pinion?
Yes. 49001-8J000 is listed as an interchange number for TERREPOWER 310-0147, along with 19320892.
