TERREPOWER 313-0215 rack and pinion for the 2006-2011 Hyundai Accent turns steering wheel input into side-to-side wheel movement. This remanufactured hydraulic unit replaces a worn or leaking steering gear.
- Remanufactured hydraulic power steering rack and pinion
- Designed for dependability and reliability across the vehicle's service life
- 3 total turns lock to lock
- Pressure port thread M14X1.50 and return port thread M16X1.50
Quick facts
- Part: TERREPOWER 313-0215 rack and pinion
- Also called: rack and pinion assembly
- Fits: 2006-2011 Hyundai Accent
- Condition: Remanufactured
A worn steering rack can show up as loose or wandering steering, a groan when turning, or fluid seeping near the steering gear. Hoses, fittings and tie rods can produce similar signs, so with the engine off, look over the hoses and fittings for wet spots before you decide the rack is at fault.
Fits
It is a direct-fit replacement for the 2006-2011 Hyundai Accent. This listing is one unit, and the 2006-2011 Hyundai Accent takes one.
Specifications
Fit and size
- Quantity per vehicle: 1
- Input shaft length: 1.625 in (41.28 mm)
- Input shaft diameter: 0.688 in (17.46 mm)
- Distance between mounting holes: 3.56 in (90.424 mm), 2 mounting holes
- End-to-end length: 41.25 in (1047.75 mm)
Build and materials
- Type: Hydraulic
- Condition: Remanufactured
- Tie rods: inner included, outer not included
- Bushings: included
- Country of origin: Mexico
In the box
One remanufactured rack and pinion assembly with its inner tie rods and bushings. Outer tie rods are not included.
Frequently Asked Questions
Is this the right rack and pinion for the 2006-2011 Hyundai Accent?
Yes. TERREPOWER 313-0215 is a direct-fit replacement for the 2006-2011 Hyundai Accent, which takes one.
Does the TERREPOWER 313-0215 come with tie rods?
TERREPOWER 313-0215 comes with the inner tie rods and bushings. The outer tie rods are not included.
What thread sizes are the ports on this power steering rack?
The pressure port thread is M14X1.50 and the return port thread is M16X1.50.
Is a groaning noise when turning a sign of a worn hydraulic rack and pinion?
Yes, a worn hydraulic rack can groan when turning, steer loosely or seep fluid near the steering gear, though other parts can cause similar signs; a shop can test the system.
What size is the input shaft on this rack and pinion?
The input shaft is 1.625 in (41.28 mm) long and 0.688 in (17.46 mm) in diameter.
