TERREPOWER formerly BBB Industries Rack and Pinion Assembly P/N:N305-0177
$671.99
(You save)
Keep steering effort light and wheel response predictable with the TERREPOWER (formerly BBB Industries) Rack and Pinion Assembly N305-0177 — a brand-new hydraulic power steering rack & pinion that installs as a direct-fit replacement for the 2007-2010 Honda Odyssey [All]. The rack converts steering-wheel input into the side-to-side motion that turns the front wheels, using hydraulic pressure to assist that effort.
New, not remanufactured: a premium-quality new unit built for dependability and reliability throughout the vehicle's service life.
Hydraulic power assist: Type: Hydraulic, with pressure and return ports both threaded M16X1.50.
Inner tie rods & bushings included: ships with inner tie rods and bushings; outer tie rods are not included.
To-spec dimensions: 46.875 in (1190.625 mm) end-to-end, 3.438 total turns lock-to-lock, two mounting holes spaced 4.07 in (103.378 mm) apart, with a 5.688 in (144.463 mm) input shaft measuring 0.654 in (16.619 mm) in diameter.
Signs the original rack may need replacing include steering-fluid leaks, a wandering or loose feel, and increased steering effort. Diagnose the cause before replacing. Country of origin: China.
Interchange: 19320629 · 53601-SHJ-A86 · 53601SHJA86. Manufacturer part number N305-0177 (also N3050177).
This part cross-references / interchanges with the following part numbers:
19320629, 53601-SHJ-A86
Frequently Asked Questions
Which vehicles does this rack and pinion fit?
It is a direct-fit replacement for the 2007-2010 Honda Odyssey [All]. Check the Buyer's Guide tab to confirm fitment for your specific vehicle.
Is this a new or remanufactured unit?
It is a brand-new power steering rack and pinion, not remanufactured, built for dependability throughout the vehicle's service life.
Are the tie rods included?
Inner tie rods and bushings are included with this assembly. Outer tie rods are not included.
Is this a hydraulic or electric rack?
It is a hydraulic power steering rack and pinion, with pressure and return ports threaded M16X1.50.
What are signs my rack and pinion may need replacing?
Common signs include power-steering fluid leaks, a loose or wandering feel, and increased steering effort. Diagnose the cause before replacing, since these can have other sources.
Write a Review
Nugeon
TERREPOWER formerly BBB Industries Rack and Pinion Assembly P/N:N305-0177
Turn every steering-wheel input into confident, controlled left-and-right movement with the TERREPOWER (formerly BBB Industries) New Power Steering Rack & Pinion, part number N305-0120. This...
New Steering Rack and Pinion Unit - PowerPremium-quality new power steering rack & pinion designed for dependability and reliability throughout the service life of the vehicle.
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
