Nut - Dorman 961-330D

$24.99

Part number: 961-330D

UPC: 885484961005

Condition: New

Weight: 0.04 LBS

Item Package Quantity: 1

$24.99

Current Stock: 98

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Dorman Nut P/N:961-330D

$24.99

Description

Dorman 961-330D nut assortment packs thread cutting nuts in five SAE sizes. Pick the size that matches the fastener you are working on.

Steel nuts made to specific thread tolerance standards
Salt spray tested for corrosion resistance
Five sizes in one pack: 1/8, 5/32, 3/16, 1/4 and 5/16 in.
Used in a variety of jobs, from auto to home

Quick facts

Part: Dorman 961-330D nut
Material: Steel
Condition: New

A nut that spins without tightening, or one with stripped, crossed or rusted threads, may need replacing. Those signs alone do not prove the nut is at fault; a worn bolt or stud can leave you with the same loose fit.

Fits

This is universal hardware, sold by size and thread rather than by vehicle. Match the thread size and height to the part being replaced.

Specifications

Fit and size

Thread sizes: 1/8, 5/32, 3/16, 1/4 and 5/16 in. (SAE)
Inside diameter: 0.1 in, 0.12 in, 0.21 in, 0.28 in
Height: 0.21 in, 0.30 in
Pieces: one assortment pack

Build and materials

Type: thread cutting nut assortment
Material: steel
Finish: none
Grade: standard
Heat hardened: no
Washer attached: no
Shouldered end: no
Condition: new
Country of origin: Taiwan

In the box

One thread cutting nut assortment in five sizes. This listing is one assortment pack, and the nuts have no washer attached.

Interchange: 455750

Product information is for general reference and may contain errors. See our Disclaimer.

Manufacturer's description

Product specs

Vehicles it fits

Interchange numbers

This part cross-references / interchanges with the following part numbers:

455750

Buyer's Q&A

Frequently Asked Questions

Which fasteners will the Dorman 961-330D thread cutting nuts go on?

They are universal hardware, not matched to a vehicle. Match the thread size and height to the part being replaced; the pack covers 1/8, 5/32, 3/16, 1/4 and 5/16 in. sizes.

Do these thread cutting nuts come with washers?

No. The nuts have no washer attached and no shouldered end. The pack is one thread cutting nut assortment in five sizes.

Are the nuts in this Dorman nut assortment SAE or metric?

SAE. Dorman 961-330D covers thread sizes of 1/8, 5/32, 3/16, 1/4 and 5/16 in.

Are these steel thread cutting nuts corrosion tested?

Yes. The hardware goes through salt spray testing to check corrosion resistance. The steel nuts have no finish applied.

Does 455750 cross to the Dorman 961-330D nut assortment?

Yes. 455750 is listed as an interchange number for the Dorman 961-330D thread cutting nut assortment.