Rear Wheel Bearing and Hub Assembly for 1995-2002 Honda Accord - Timken 512178

$127.99

Timken Wheel Bearing and Hub Assembly 512178

Timken Wheel Bearing and Hub Assembly 512178 - view 2

Timken Wheel Bearing and Hub Assembly 512178 - view 3

Timken Wheel Bearing and Hub Assembly 512178 - view 4

Part number: 512178

UPC: 053893934556

Condition: New

Weight: 5.10 LBS

Item Package Quantity: 1

$127.99

Current Stock: 53

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Timken Wheel Bearing and Hub Assembly P/N:512178

$127.99

Description

Timken 512178 rear wheel bearing and hub assembly for the 1995-2002 Honda Accord carries the wheel and lets it turn freely on the axle. This Timken wheel bearing comes preset, pre-greased and pre-sealed.

Tests control the design, materials and manufacturing process of the hub bearing assemblies
Low runout to reduce noise and vibration and improve braking performance
Seal with a reinforced outer case, ribbed rubber inner diameter and contamination exclusion system
Seal vent holes prevent installation damage, promote positive sealing and enhance seal life
Bearings with precision profiles, uniform internal geometry and enhanced surface finishes for more load carrying capacity and longer bearing life

Quick facts

Part: Timken 512178 wheel bearing and hub assembly
Fits: 1995-2002 Honda Accord
Position: Rear
Condition: New

A growl or hum that rises with speed, or play at the rear wheel, can mean this bearing is worn, though an unbalanced tire or a brake rotor problem can be behind similar sensations. Plan on doing both rear wheels at once; this listing is a single hub unit, and the axle takes one on each side.

Fits

It is a direct-fit replacement for the rear axle of the 1995-2002 Honda Accord.

Specifications

Fit and size

Position: Rear
Quantity per vehicle: 2, one on each side of the axle
Bolt circle diameter: 114.3 mm (4.5 in), 4 wheel studs
Brake pilot diameter: 64 mm (2.52 in)
Wheel pilot diameter: 64 mm (2.52 in)
Flange diameter: 152 mm (5.984 in)
Flange offset: 56 mm (2.205 in)

Build and materials

Drive type: Non-driven
Condition: New
ABS sensor: 100% tested to monitor wheel speed for anti-lock braking systems

Interchange: 051-6162 · 406.40014 · 406.40015
WE60525 · WE60526 · 512177 · BR930234 · BR930276

Manufacturer's description

Product specs

Vehicles it fits

Interchange numbers

This part cross-references / interchanges with the following part numbers:

WE60525, WE60526, 051-6162, 406.40014, 406.40015, 512177, 512178, BR930234, BR930276

Buyer's Q&A

Frequently Asked Questions

Is this the wheel bearing for the rear axle of the 1995-2002 Honda Accord?

Yes. Timken 512178 is a rear wheel bearing and hub assembly for the 1995-2002 Honda Accord, with four wheel studs and a 114.3 mm (4.5 in) bolt circle.

What are the pilot and flange sizes on the Timken 512178?

The Timken 512178 has a 64 mm (2.52 in) brake pilot, a 64 mm (2.52 in) wheel pilot and a 152 mm (5.984 in) flange, with a 56 mm (2.205 in) flange offset.

Are Timken hub bearings like this one driven or non-driven?

This rear wheel bearing and hub assembly is a non-driven unit. It turns with the wheel on the axle and does not receive power from the drivetrain.

What kind of seal do Timken wheel hubs like this one use?

The seal has a reinforced outer case, a ribbed rubber inner diameter and a contamination exclusion system. Its vent holes prevent installation damage and promote positive sealing.

Does Timken 512178 interchange with BR930234?

Yes. BR930234 is one of the cross-reference numbers listed for Timken 512178 on the Interchange line of this page.