Front Wheel Bearing and Hub Assembly for 1993-2002 Chevrolet Camaro & More - Timken 513090

$224.99

Timken Wheel Bearing and Hub Assembly 513090

Timken Wheel Bearing and Hub Assembly 513090 - view 2

Timken Wheel Bearing and Hub Assembly 513090 - view 3

Timken Wheel Bearing and Hub Assembly 513090 - view 4

Part number: 513090

UPC: 053893836775

Condition: New

Weight: 6.40 LBS

Item Package Quantity: 1

$224.99

Current Stock: 21

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Timken Wheel Bearing and Hub Assembly P/N:513090

$224.99

Description

Timken 513090 front wheel bearing and hub assembly for the 1993-2002 Chevrolet Camaro and other vehicles lets the front wheel turn on a bearing built into a single hub unit.

Preset, pre-greased and pre-sealed hub unit bearing assembly
Tests control the design, materials and manufacturing process of the hub bearing assembly
Low runout that reduces noise and vibration
Seals with a reinforced outer case, ribbed rubber inner diameter, contamination exclusion system and vent holes against installation damage
Precision-profile bearings with uniform internal geometry and enhanced surface finishes for load carrying capacity and bearing life

Quick facts

Part: Timken 513090 wheel bearing and hub assembly
Fits: 1993-2002 Chevrolet Camaro and other vehicles
Position: Front

A hum or growl that changes with speed, vibration, or a loose feel at the wheel can mean a worn wheel bearing. Before replacing it, look over the tires for cupping or uneven wear, since worn tires can hum and vibrate too. A shop can test the rest.

Fits

It fits the 1993-2002 Chevrolet Camaro, the 1993-2002 Pontiac Firebird and the 2001-2004 Avanti II. Every car named here takes two, one at each front wheel; this listing is one hub, and the other side of the axle is normally done at the same time.

Specifications

Fit and size

Position: Front
Quantity per vehicle: 2
Bolt circle diameter: 120.65 mm (4.750 in), 5 wheel studs
Flange bolt holes: 4
Flange diameter: 147.00 mm (5.787 in)
Flange offset: 68.72 mm (2.706 in)
Brake pilot diameter: 70.60 mm (2.780 in)
Hub pilot diameter: 71.72 mm (2.824 in)
Wheel pilot diameter: 70.10 mm (2.760 in)

Build and materials

Type: Hub unit assembly, preset, pre-greased and pre-sealed
Drive type: Non-driven

Interchange: 407.62019
WE60844 · BR930186

Manufacturer's description

Product specs

Vehicles it fits

Interchange numbers

This part cross-references / interchanges with the following part numbers:

WE60844, 407.62019, 513090, BR930186

Buyer's Q&A

Frequently Asked Questions

Is this Timken wheel bearing and hub assembly right for the 2001-2004 Avanti II?

Yes. Timken 513090 front wheel bearing and hub assembly fits the 2001-2004 Avanti II, and this listing is one hub.

What is the bolt circle on these Timken hub bearings?

Timken 513090 has a 120.65 mm (4.750 in) bolt circle with 5 wheel studs, plus 4 flange bolt holes and a 147.00 mm (5.787 in) flange diameter.

How do I know my Timken wheel hubs are wearing out?

Growling or humming that gets louder as speed rises, or vibration felt through the steering wheel, can mean the front wheel bearing is wearing. If you notice either, have it checked promptly.

Is this Timken wheel bearing pre-greased and sealed?

Yes. Timken 513090 is a preset, pre-greased and pre-sealed hub unit bearing assembly, and its seals have vent holes to prevent installation damage.

Are Timken front wheel bearings like 513090 driven or non-driven?

Non-driven. Timken 513090 is listed as a non-driven hub unit, with a 70.60 mm brake pilot, a 71.72 mm hub pilot and a 70.10 mm wheel pilot.