Front Right Wheel Bearing and Hub Assembly for 2004-2006 Pontiac GTO - Timken HA590006

$277.99

Timken Wheel Bearing and Hub Assembly HA590006

Timken Wheel Bearing and Hub Assembly HA590006 - view 2

Timken Wheel Bearing and Hub Assembly HA590006 - view 3

Timken Wheel Bearing and Hub Assembly HA590006 - view 4

Part number: HA590006

UPC: 053893563367

Condition: New

Weight: 9.30 LBS

Item Package Quantity: 1

$277.99

Current Stock: 13

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Timken Wheel Bearing and Hub Assembly P/N:HA590006

$277.99

Description

Timken HA590006 front right wheel bearing and hub assembly for the 2004-2006 Pontiac GTO lets the front right wheel turn on its bearing. This Timken wheel bearing is a preset, pre-greased and pre-sealed hub unit.

Seals with a reinforced outer case, a ribbed rubber inner diameter and a contamination exclusion system for positive sealing and longer seal life
Seal vent holes help prevent damage during installation
Low runout reduces noise and vibration and improves braking performance
Precision profiles, uniform internal geometry and enhanced surface finishes increase load carrying capacity and extend bearing life

Quick facts

Part: Timken HA590006 wheel bearing and hub assembly
Fits: 2004-2006 Pontiac GTO
Position: Front right

A hum or growl that changes with road speed, or vibration you feel through the car, can mean a worn wheel bearing. Tires, brake rotors and suspension joints can produce similar noise and vibration, so find out which part is at fault before buying.

Fits

It fits the 2004-2006 Pontiac GTO at the front right, one hub per side. Both front hubs are normally replaced together; this listing is one hub for the front right, and the front left is a separate part.

Specifications

Fit and size

Position: Front right
Drive type: Non-driven
Bolt circle: 120 mm (4.724 in), 5 wheel studs
Flange bolt holes: 3
Flange diameter: 140 mm (5.512 in)
Flange offset: 43 mm (1.693 in)
Hub pilot diameter: 76 mm (2.992 in)
Brake pilot diameter: 71.5 mm (2.815 in)
Wheel pilot diameter: 69.5 mm (2.736 in)

Build and materials

Type: Preset, pre-greased and pre-sealed hub unit
ABS sensors: 100% tested to monitor wheel speed for the anti-lock braking system

Interchange: 407.62028
513218 · BR930372

Manufacturer's description

Product specs

Vehicles it fits

Interchange numbers

This part cross-references / interchanges with the following part numbers:

407.62028, 513218, BR930372

Buyer's Q&A

Frequently Asked Questions

Is this Timken wheel bearing and hub assembly right for the 2004-2006 Pontiac GTO?

Yes, Timken HA590006 is the front right unit for the 2004-2006 Pontiac GTO, one hub per side. The front left is a separate part.

What bolt circle and stud count do these Timken wheel hubs have?

This hub has a 120 mm (4.724 in) bolt circle and takes 5 wheel studs. The flange has 3 bolt holes and a 140 mm (5.512 in) diameter.

Do Timken front wheel bearings make noise when they wear?

A worn wheel bearing can hum or growl, often changing with road speed, and can add vibration. Pay attention to whether the sound changes as the car speeds up or slows down.

Does the Timken HA590006 come pre-greased and pre-sealed?

Yes. Timken HA590006 is a preset, pre-greased and pre-sealed hub unit, and its seals have vent holes that help prevent damage during installation.

Are Timken hub bearings tested during manufacture?

Yes. Timken hub bearing assemblies are built under OE-developed tests that control the design, materials and process, and the ABS sensors are 100% tested.